M

Mukiwa

Well-Known Member

• Aug 30, 2017

• #1

Hi guys,
I have changed the rotary coupler for an flea bay special as after reading many of these SRS posts it's mostly the rotary coupler that's the problem. I have searched on here and no code 065 specific posts that I can find.
Nanocom gives me this code now:

CODE 065
INVALID FAULT CODE
(PERMANENT)

Any ideas please? I will check the underseat connectors and passenger airbag tomorrow. This all started when I moved the steering wheel column adjuster as the wheel was too low.
Can't put it through the MOT until I get this fixed.

 

ukadamwest

Well-Known Member

• Aug 30, 2017

• #2

martyuk is your man here

 

M

Mukiwa

Well-Known Member

• Aug 30, 2017

• #3

Cheers Ukadamwest

 

M

Mukiwa

Well-Known Member

• Aug 31, 2017

• #4

Solved!!!!!!!!!! Second blown bulb in the display! So therefore......
CODE 065
INVALID FAULT CODE
(PERMANENT)

= ONE of your SRS bulbs is not working

 

ukadamwest

Well-Known Member

• Aug 31, 2017

• #5

Good info !

 

M

Mukiwa

Well-Known Member

• Sep 1, 2017

• #6

I had a fault on my nanocom showing as (if I recall) left hand blend motor fault something or other plus temp sensor failed. This meant my blend motors had jammed in the windscreen demist position - luckily for me this time! Nanocom wouldn't reset the blend motors it could only turn the fans on and off.
So...... can someone please explain how replacing the blown SRS fuse in the dash suddenly made the blend motors start working again? How on earth can one affect the other?

Anyway I'm happy now as the blend motors have moved for the first time in 9 months, I just need to get a new condensor and gas her up and inshallah A/C should now work!

MoT this afternoon so fingers crossed

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Sep 1, 2017

• #7

Mukiwa said:

I had a fault on my nanocom showing as (if I recall) left hand blend motor fault something or other plus temp sensor failed. This meant my blend motors had jammed in the windscreen demist position - luckily for me this time! Nanocom wouldn't reset the blend motors it could only turn the fans on and off.
So...... can someone please explain how replacing the blown SRS fuse in the dash suddenly made the blend motors start working again? How on earth can one affect the other?

Anyway I'm happy now as the blend motors have moved for the first time in 9 months, I just need to get a new condensor and gas her up and inshallah A/C should now work!

MoT this afternoon so fingers crossed

Click to expand...

Every so often (once a week) change the temp from LO for a minute or two to HIGH for a minute or two and then back to whatever you usually have it. Seems to help keep them free.

 

pwood999

Well-Known Member

Full Member

• Sep 3, 2017

• #8

Mukiwa said:

Solved!!!!!!!!!! Second blown bulb in the display! So therefore......
CODE 065
INVALID FAULT CODE
(PERMANENT)

= ONE of your SRS bulbs is not working

Click to expand...

Maybe you should post this info on the Nanocom Forums, and hopefully they will add it to the next software release ?

 

M

Mukiwa

Well-Known Member

• Sep 3, 2017

• #9

Good idea, I'll do that