Tree Worrier
New Member
I have recently put my 2A 109 onto a 1986 rangy chassis (to cure my palpitatations from bad drum brake near misses) The rangy was a V8 and my 2A is running a N/A 2.5 D . I have a problem on the front spring travel due to the excess wieght of the 2.5 lump compared to the V8 unit.
Though I have fitted green white coded RR springs , the resting compression measure is within safe tollerance (for rangy) .I am finding that potholes and sharp edges are causing the axle to bottom out on the bump stops.
Can any body please suggest a sensible stock or aftermarket part.
Though I have fitted green white coded RR springs , the resting compression measure is within safe tollerance (for rangy) .I am finding that potholes and sharp edges are causing the axle to bottom out on the bump stops.
Can any body please suggest a sensible stock or aftermarket part.