C

Chris Wing

New Member

• Jul 5, 2005

• #1

Hi i've been looking at the special offer mm 4x4 are doing on their 3" spring lift kit it can be found here..http://www.mm-4x4.com/Shop/index.htm should this be quite a straight forward fit would i need anything else than the springs and shocks? please let me know your thoughts?

 

C

Charlotte

New Member

• Jul 5, 2005

• #2

Hi you may need brake pipes lengthened

Charlotte

 

C

Charlotte

New Member

• Jul 11, 2005

• #3

if it works let me know as I'm considering a lift kit on my Range Rover

 

C

Chris Wing

New Member

• Jul 12, 2005

• #4

Changed my mind in the end and bought some 2" spacers from a guy on ebay these sit at the bottom of the shocks and spring seats and give a lift of 2" i will let you know how i get on! might still go for a 2" spring and shock lift as well for 4" but dont know yet?

 

bellautos

Active Member

• Jul 12, 2005

• #5

Be carefull of lifting it to hi , It can cause the prop shaft angles to be miles out .
This sometimes leads to vibrations or even prop shaft joint failure.