B

bodhi-z

Member
Hi,

I would like to fit new springs and shocks to my 1988 200tdi converted 90 at some point as part of ongoing refurbishment - just wondered if I will need spring compressors?
I had a look on the net and some say that you need them, whilst others appear to be able to change the springs out by supporting the vehicle on it's chassis rails, and then dropping down the axle on the jack and wriggling them out with a bit of leverage.

Whats the best way??
 
Just buy a cheap set of compressors m8! So straight forward then! just mind your fingers!
 
Handy tho not essential for fronts!If I undo clamps and shox and jack chassis my rears fall out on the road! Try a search
 
I found spring compressers helpful when fitting medium springs... with heavy duty ones I would suggest you borrow or buy a set of Ebay.... just makes it easier.
A pry bar or crow bar is helpfull when removing and easing them in and a wood or rubber mallet for giving them a smack... Avoid a hammer... metal on metal.
When you lower the axle just watch you dont stretch the brake pipes...more often than not you can put a bit of extra downward pressure on the hub so the spring will pop out easily.
Where abouts are you? Someone may a set of spring compressers and be local to you.
 
LR90 said:
Just buy a cheap set of compressors m8! So straight forward then! just mind your fingers!
Click to expand...

why - when he doesn't need them ?

just lift the chassis with a farm jack a corner at a time and you'll be able to remove and replace the springs without needing any compression
 
Sean said:
why - when he doesn't need them ?

just lift the chassis with a farm jack a corner at a time and you'll be able to remove and replace the springs without needing any compression
Click to expand...

Do that then :D
Just thought might be better for the lad & safer. as not everyone has all the equipment! if he aint got compressors he aint got large jacks!
 
MrJC said:
I found spring compressers helpful when fitting medium springs... with heavy duty ones I would suggest you borrow or buy a set of Ebay.... just makes it easier.
A pry bar or crow bar is helpfull when removing and easing them in and a wood or rubber mallet for giving them a smack... Avoid a hammer... metal on metal.
When you lower the axle just watch you dont stretch the brake pipes...more often than not you can put a bit of extra downward pressure on the hub so the spring will pop out easily.
Where abouts are you? Someone may a set of spring compressers and be local to you.
Click to expand...

Great advice!:D
 
LR90 said:
Do that then :D
Just thought might be better for the lad & safer. as not everyone has all the equipment! if he aint got compressors he aint got large jacks!
Click to expand...

think you'll fine peeps are MUCH more likely to have a farm jack than a set of springs compressors - farm jacks have a multitude of uses, so why buy a tool that you'll probably only use a few times a decade
 
Sean said:
think you'll fine peeps are MUCH more likely to have a farm jack than a set of springs compressors - farm jacks have a multitude of uses, so why buy a tool that you'll probably only use a few times a decade
Click to expand...

Valid point

Sean said:
you've never changed a set of landy springs before have ya
Click to expand...

No m8 can i do it on my iphone? :cool::doh:
 
Sean just ignore him, maybe wants to be the new NoB?

You don't need any form of spring compressors to change any of the springs even HD or lift kits.

Lee
 
bevhelee said:
Sean just ignore him, maybe wants to be the new NoB?

You don't need any form of spring compressors to change any of the springs even HD or lift kits.

Lee
Click to expand...

No m8! Read the comment I was helping And Sean just decided to attack me which seems the thing todo on here! (same with you)

How the he'll to you assume iv never done anything before! It's the classic I'm a big head & no one else can have a say issue again! What a shame brings the site down so bad...
 
I shall say it again!

Judge a man by how he treats a man who is of no use to him!
 
LR90 said:
No m8! Read the comment I was helping And Sean just decided to attack me which seems the thing todo on here! (same with you)

How the he'll to you assume iv never done anything before! It's the classic I'm a big head & no one else can have a say issue again! What a shame brings the site down so bad...
Click to expand...

THAT wasn't an attack - was simply trying the save the OP some money AND make the task easier AND safer

ya big girl
 
You must log in or register to reply here.

Similar threads

T
Rear spring stuck in upper seat
Replies
14
Views
688
Twinnie
T
L
Black & Decker BD 195/6 compressor
Replies
0
Views
597
lrmonks
L
Flossie
Is it possible to renew the front springs...
2
Replies
21
Views
1K
Chalky.
Chalky.
B
WANTED - Help Sourcing Genuine Land Rover Snorkel
Replies
0
Views
218
Bowler 90
B
DAJDefender
Lower spring seat corrosion
Replies
6
Views
497
DAJDefender
DAJDefender