loiner1965
New Member
3m and farecla do compound in a tube but to be honest you will not denib the flies out succesfully...i use waterbase and high solids clearcoat and occasionally flies land on mine..i pull them out with masking tape and drop another coat on...i use 3m green top fast compound with 1500/2000 paper followed by 4000 pad....you will find you might not put enough clearcoat on to wet flat and compound and also if its not fully cured and if you using a buffer you will burn the finish as the heat generated will soften 1 pack paints.Ah'm sure there's a polishin' compound, but canae mind it's name (not t-cut) It's a paste type stuff that ye use with a buffer/ polishin' mop type thing.
Didnae have too much a prob wi' the flies as ah did most of the paintin' inside and then when it 'felt' dry, ah stuck it out side tae bake a bit in the sun
sorry for being a bearer of bad news but been a professionel painter for 30 years and been there and done it.....cannot do anything with a spanner though