S

Steve555Y

New Member
Hi all
I am trying to put some spot-lamps onto my Freelander 2005 TD4 facelift. I have drilled the bumper to put spot-lamp on. Do the little air grills come off and how. Do not wish to take the hole bumber off know body to help me. If I coud find a way of taking just one of the three grilles of i then could do the back nuts up on spot lamps and run the wires. There got to be a way of doing this without taking the front bumper off. Land rover do not make thngs easy? :doh:
Regards Steve
 
I'm not aware of any way of doing this without removing the bumper and when I did mine, as I mounted onto box section I had to use nutserts to bolt into (no access to put nut on back). Getting bumper off was a drag (be prepared for lots of WD40 and the odd hacksaw blade); putting it back on was a breeze, but I had the foresight to get some replacement screws and spire clips.
 
You must log in or register to reply here.

Similar threads

Swl26
Freelander 1 Driving Lamp Query
Replies
8
Views
1K
Dar ran Dar ran
Dar ran Dar ran
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
0
Views
430
Alex1000
A
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
16
Views
971
Alex1000
A
dag019
Fitting a Husky Winch
Replies
8
Views
572
dag019
dag019
badlad
Are the hoses different
Replies
4
Views
295
badlad
badlad