I

iceman4x4

New Member

• Sep 18, 2012

• #1

hi all
right i have a 1999 freelander with the L series engine well the clutch want bang so took it apart and i have been lift with a problem you see there is no spigot bush rang local dealer who said that its not on his parts list
now sould there be one or does the shaft from the gear box just float around with the clutch plate ??? never seen of it before
any ways any help on this would be great
thx
bill

 

Happyhippo

Active Member

• Sep 18, 2012

• #2

Iceman
there is no spigot bush and yes it does just float around.
Happyhippo

 

freelance

Well-Known Member

• Sep 18, 2012

• #3

there was never a bush in the rover k series, so doubt there will be one, never had mine apart.

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #4

No bush in my 1.8!

 

Freelaner

Landy Driver

• Sep 18, 2012

• #5

Diesel Do said:

No bush in my 1.8!

Click to expand...

you mean you forgot to fit the spigot bush

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #6

Doh! Is that what it was for? Maybe that's why I was soooo quick


DD

 

Freelaner

Landy Driver

• Sep 18, 2012

• #7

Diesel Do said:

Doh! Is that what it was for? Maybe that's why I was soooo quick


DD

Click to expand...

Ha, all that tea no wonder you had that big box of bits left over

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #8

Shoulder bolts!


DD

 

Freelaner

Landy Driver

• Sep 18, 2012

• #9

Diesel Do said:

Shoulder bolts!


DD

Click to expand...

yer arms fell off

 

jamesmartin

Well-Known Member

• Sep 18, 2012

• #10

transverse boxes are differently set up than longitudinally ones (input shaft runs right through the box so is supported both ends or very near one end )

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #11

jamesmartin said:

transverse boxes are differently set up than longitudinally ones (input shaft runs right through the box so is supported both ends or very near one end )

Click to expand...

A simple "no" would suffice


DD

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #12

Freelaner said:

yer arms fell off

Click to expand...

Shoulder bolts don't hold your arm on! It's the technical term for the spare ones that get thrown over your shoulder

No I didn't have any left over


DD

 

Freelaner

Landy Driver

• Sep 18, 2012

• #13

Diesel Do said:

Shoulder bolts don't hold your arm on! It's the technical term for the spare ones that get thrown over your shoulder

No I didn't have any left over


DD

Click to expand...

:doh:

i dint think fer a second yer would have

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #14

I think it's one of the few times that I haven't found bolts missing on it!


DD

 

Freelaner

Landy Driver

• Sep 18, 2012

• #15

most of the bolts on mine are present, but rounded off

 

I

iceman4x4

New Member

• Sep 18, 2012

• #16

many thanks for that
now how do you line the bloody thing up then when replaceing tne clutch as the hole in the flywheel is bigger then the hole in the clutch plate as my clutch aligning tool is no good for this ????
any help

 

Freelaner

Landy Driver

• Sep 18, 2012

• #17

line it up by eye or use a cut off broom handle wrapped with electricians tape

 

jamesmartin

Well-Known Member

• Sep 18, 2012

• #18

one of these they dont use hole in flywheel Laser 2646 Clutch Alignment Tool/Universal

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #19

I use the force


DD

 

Diesel Do

Well-Known Member

• Sep 18, 2012

• #20

You can do it by feel too! Feel around the edge to get the pressure plate central, works on most clutches, did it on my 1.8, never done one of them tho!


DD