helijohn · Sep 4, 2016

So when I got the motor according to SWOM it looked like someone had been sick on the speaker grilles.

So I decided to give them a seeing to. What a game getting the door handle inserts off to get to the screws. I very nearly didn't put them back on again.
So card(s) off - muck and bullets everywhere etc. This picture has been cleaned up.

The grille itself is held on buy some nuts, whipped it off and then after a bit of prep got they painted. Gave everything a good clean up so it is starting to smell sweeter inside the cab and put it all back together.

Time to complete, 3 hours.

gstuart · Sep 4, 2016

that's look good, done the same to mine

is fun bending the pins back , lol got some new backing for the speakers , just bought a small roll of Amazon sprayed them black as well. is good fun in not trying to get drips off the grills by putting too much paint on

does make a lot of difference and think you've done a cracking job

also done the tweeters as well as they do seem to fade , getting knocked

reminds me got to still do the back ones

helijohn · Sep 4, 2016

Thanks. I will also do the tweeters later though they are fairly decent and I wanted the main ones done as they were an eyesore. The pic doesn't do the grot justice.

TD4_4x4 · Sep 6, 2016

Looks great, good job, and it's transformed your car. I just got mine resprayed as they'd rusted (after market speaker grills in metal).

helijohn · Sep 6, 2016

Thanks. it is pretty much all like that inside the cab but bit by bit I am making it habitable.

gstuart · Sep 6, 2016

helijohn said:
Thanks. it is pretty much all like that inside the cab but bit by bit I am making it habitable.

suprising how much nicer and cleaner it looks by doing these small jobs

but always seems to take ages in getting them right , lol

helijohn · Sep 6, 2016

gstuart said:
suprising how much nicer and cleaner it looks by doing these small jobs

but always seems to take ages in getting them right , lol

It always amazes me just how much junk I find under things. I took a cover off the thing under the driver seat while I had the seat out and found money, screwdriver and other stuff.

Alibro · Sep 7, 2016

After I finish fixing the VCU, respray rear door, install the lift kit, replace the wheels, fumigate the interior, fix the intermittent amigos light, repair the fuel tank support, replace the vac hoses and probably the same again I'll need to respray my speaker grills.

Maybe tomorrow,

GrumpyGel · Sep 7, 2016

helijohn said:
It always amazes me just how much junk I find under things. I took a cover off the thing under the driver seat while I had the seat out and found money, screwdriver and other stuff.

I took that cover off last weekend. I found myself a star/torqs/what ever bit it is that fitted the bolts and proceeded to undo the first bolt. The bit fell out of the sockety thing you put them in and fell down a gap and rolled under the bloody cover I was trying to get off!!!!!

Proceeded to spend ages finding something to hook it back out with!

Anyway, I got it off, then had fun trying to read the LR/WABCO part number on the ABS ECU in the confined dark space under the seat.

Not the most exciting of pictures

rob_bell · Sep 7, 2016

The driver's grille on mine has a couple of spots of corrosion too - so a great post well, timed helijohn!

Ideally, I'd like to paint it so it looked the same as it did originally. Anyone found out the correct paint code?

gstuart · Sep 7, 2016

rob_bell said:
The driver's grille on mine has a couple of spots of corrosion too - so a great post well, timed helijohn!

Ideally, I'd like to paint it so it looked the same as it did originally. Anyone found out the correct paint code?

My car is Java black, but just bought a Hammerite black paint from halfords , was the smooth version , got that due to it getting knocked and a harder wearing paint , but know there are plenty of other paints that will I imagine do the same job , just preference as its a hard wearing paint , think it was 5 quid for a large tin , plenty to do all 6 x covers

gstuart · Sep 7, 2016

helijohn said:
It always amazes me just how much junk I find under things. I took a cover off the thing under the driver seat while I had the seat out and found money, screwdriver and other stuff.

is good fun replacing a dashboard , carpet complete and heater matrix, as was suprised the amount of junk I found , no money though

took ages to Hoover the entire car out once everything was removed

rob_bell · Sep 7, 2016

Black would certainly be a lot simpler! Unfortunately, mine is like John's: it's beige!

Nodge68 · Sep 7, 2016

rob_bell said:
Black would certainly be a lot simpler! Unfortunately, mine is like John's: it's beige!

I actually think that black goes ok with the rest of the door furniture.

rob_bell · Sep 7, 2016

Or the green colour of the door handles? I think I'd go beige - although finding the right colour will be a challenge unless I take the car to a spray shop to get them to scan and mix the paint!

gstuart · Sep 7, 2016

rob_bell said:
Or the green colour of the door handles? I think I'd go beige - although finding the right colour will be a challenge unless I take the car to a spray shop to get them to scan and mix the paint!

sorry didn't realise u were trying to match that

but does look really good the black , but my interior is all black, being the 2002

if u look in halfords they have row after row of paint colours , even having manufacturer colours to

know the paint code is under the bonnet but that's ur body colour , lol

gstuart · Sep 7, 2016

Nodge68 said:
I actually think that black goes ok with the rest of the door furniture.

am with u on that , sets it off and won't show any dirt etc up ,

also bought the foam that goes under the grill , as I could see the speaker through the grill

all good fun trying to cut it out and getting it all back on , hardest bit was not getting any runs on the grill

helijohn · Sep 7, 2016

Alibro said:
After I finish fixing the VCU, respray rear door, install the lift kit, replace the wheels, fumigate the interior, fix the intermittent amigos light, repair the fuel tank support, replace the vac hoses and probably the same again I'll need to respray my speaker grills.

Maybe tomorrow,

Been there, done that (almost

) , and got the T shirt.

helijohn · Sep 7, 2016

GrumpyGel said:
I took that cover off last weekend. I found myself a star/torqs/what ever bit it is that fitted the bolts and proceeded to undo the first bolt. The bit fell out of the sockety thing you put them in and fell down a gap and rolled under the bloody cover I was trying to get off!!!!!

Proceeded to spend ages finding something to hook it back out with!

Anyway, I got it off, then had fun trying to read the LR/WABCO part number on the ABS ECU in the confined dark space under the seat.

View attachment 106847

Not the most exciting of pictures

Is that what that is?? I had the seat out and then that cover cos the cover needed fumigation too.
I use a torx screwdriver - one for each size in a set - bear in mind there are lots of hard to access screws like the side moulding on the seats. I hate torx and have never come across such a torxey motor before.
Did you not have a magnet probe. The ones with neodymium tips are really good.

helijohn · Sep 7, 2016

rob_bell said:
Black would certainly be a lot simpler! Unfortunately, mine is like John's: it's beige!

Gosh, is that the colour.

I was assuming it was smokestone or whatever they call it. I use Wilko black these days for almost everything carwise but I do favour Hammerite for certain jobs like the rear drums (gold naturally!

)

Active Member

D3 Grandad

Active Member

Active Member

Active Member

D3 Grandad

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

D3 Grandad

D3 Grandad

Well-Known Member

Well-Known Member

Well-Known Member

D3 Grandad

D3 Grandad

Active Member

Active Member

Active Member

Similar threads