Edmund Butler

Member

• Jun 7, 2017

• #1

Can't seem to locate an original spare wheel bracket for my HiCap, either online or on my vehicle (!). Does anyone have any suggestions for modifying an available bracket? Cheers, Edmund

 

neilly

Well-Known Member

• Jun 7, 2017

• #2

Hi Edmund,

How are you wanting to fit the spare wheel? Where abouts on the HCPU?

Cheers

 

Edmund Butler

Member

• Jun 7, 2017

• #3

Thanks Neilly, - in the same place it was originally mounted. That is, resting on the forward slope of the passenger side wheel well and attached to the vertical side of the tub.

 

alexc2701

Active Member

• Jun 8, 2017

• #4

M16 threaded bar and some nuts thread be big enough to put a hole in for a padlock too could either make a 5 stud bracket or just clamp through middle I took the bracket off my 90 few weeks back you coulda had that if i hadn't lobbed. I'll see if in the garage someplace

 

bankz5152

Well-Known Member

• Jun 8, 2017

• #5

Sorry thought you where on about a different type!

 

Edmund Butler

Member

• Jun 8, 2017

• #6

alexc2701 said:

M16 threaded bar and some nuts thread be big enough to put a hole in for a padlock too could either make a 5 stud bracket or just clamp through middle I took the bracket off my 90 few weeks back you coulda had that if i hadn't lobbed. I'll see if in the garage someplace

Click to expand...

Thanks, Alex. Most appreciated!

 

neilly

Well-Known Member

• Jun 9, 2017

• #7

Edmund Butler said:

Thanks, Alex. Most appreciated!

Click to expand...

http://www.allbrit.de/UNI.cfm?PAGE=770837&SPRACHE=EN

Maybe worth giving Devon 4x4 a call.

Cheers

 

Edmund Butler

Member

• Jun 9, 2017

• #8

Good work, Neilly! Thanks so much