Just rears at the moment, i will be doing fronts at a later stage.
The frames are 1.2mm thick material, 1mm galvanised skins, there also 1 piece skins rather than the 4 piece alu one's.
They take either the 3 pin or later 6 bolt Puma/Disco wheel carrier.
You can see from the pics that there much stronger built, especially below the window, there's a welded in back plate behind where there wiper motor arm go's through as it's a know area for cracking.
I do a version to take the Mudstuff inner roor card, it gives a more modern touch for older trucks.
