On or around Thu, 15 Sep 2005 02:03:47 +0100, "Lee_D"
<newsgroupNOSPAM@NOSPAMlrproject.com> enlightened us thusly:

>Last time I went out in Morph we rattled a few piccys off. I think he has
>scrubbed up quite well. Still along way to go but we're getting there!
>
>http://www.lrproject.com/morph/index.html
>

doesn't that front-mounted wheel impede yer airflow a bit?
--
Austin Shackles. www.ddol-las.net my opinions are just that
"The breezy call of incense-breathing Morn, The swallow twittering
from the strawbuilt shed, The cock's shrill clarion, or the echoing
horn, No more shall rouse them from their lowly bed."
Thomas Gray, Elegy Written in a Country Churchyard.
 
"Austin Shackles" <austinNOSPAM@ddol-las.net> wrote in message
news:47fji1dv2c41r4m8bfv99p603l3kalue9g@4ax.com...
>>http://www.lrproject.com/morph/index.html
>>
>
> doesn't that front-mounted wheel impede yer airflow a bit?

Early days yet. They were fitted there on some models so I remain quietly
confident that it'll be ok.

Theres a humoungous gap between the chassis rails for air to be drawn up and
my logic is that the wheel will cause low pressure encouraging the air up
and through the fan. The Radiator is set back quite a bit from the front.
Local running has shown no noticable increase on the temp and internally in
the cab it's as hot as it's ever been.

Just been bunging on a pair of HIF's so once I'm ready for the road I'll do
some more road test.

My mount is very home made but easily removable with no damage to the front
end.

I did consider the other day if it does get hot on long runs , turning the
wheel so that the offset is the other way around thus allowing more air
through.

Lee D


 
Lee_D wrote:

> My mount is very home made but easily removable with no damage to the front
> end.

I didn't like that plate you made for the wheel studs ! Can I persuade
you to accept a free 8mm steel plate, with 3 predrilled holes at the
October meet up.

Steve
 
"steve Taylor" <steve@thetaylorfamily.org.uk> wrote in message
news:4329dfbf$0$17950$db0fefd9@news.zen.co.uk...
> Lee_D wrote:
>
>> My mount is very home made but easily removable with no damage to the
>> front
>> end.
>
> I didn't like that plate you made for the wheel studs ! Can I persuade
> you to accept a free 8mm steel plate, with 3 predrilled holes at the
> October meet up.
>
> Steve

Snot really finished in those piccys, There is a plate welded across between
the angle and the old wheel carrier. Then there are two pieces of angle
going verticle above the shackle bolts with a horizontal piece of angle
joining them to the top of the old wheel carrier. The two top corners are
then bolted through the grill by four bolts to angled plates with captive
nuts welded on which in turn are bolted to the inner tunnel with four bolts
each side and a 4mm ally plate to spread the load of the four bolts. If
anything the end result it rather over engineered.... It's been subject to
the "Missing link" hanging from the wheel and bouncing up and down like a
kid in a trampoline shop and passed the test with flying colours. Weakest
part is probably the two 3/4 inch bolts through the shackle eyes.

But yes , spare plate is always welcome ;0)

Lee D


 
On Thu, 15 Sep 2005 20:35:57 +0100, "Lee_D"
<newsgroupNOSPAM@NOSPAMlrproject.com> wrote:

>I did consider the other day if it does get hot on long runs , turning the
>wheel so that the offset is the other way around thus allowing more air
>through.

Like a funnel? I thought about this, also a scoop just under the
front crossmember to force air up. Love the paint job so far, very
dignified - I even expect the rivet counters to nod.

Can you lend your mum to Graham now - Emma is wearing out... :)

 
On Sat, 17 Sep 2005 21:14:59 +0100, Mother <"@ {mother} @"@101fc.net>
wrote:

>On Thu, 15 Sep 2005 20:35:57 +0100, "Lee_D"
><newsgroupNOSPAM@NOSPAMlrproject.com> wrote:
>
>>I did consider the other day if it does get hot on long runs , turning the
>>wheel so that the offset is the other way around thus allowing more air
>>through.
>
>Like a funnel? I thought about this, also a scoop just under the
>front crossmember to force air up. Love the paint job so far, very
>dignified - I even expect the rivet counters to nod.
>
>Can you lend your mum to Graham now - Emma is wearing out... :)

I've been trying to get him to send him mum round here for a year or
so to sort my 101 out. not worked yet :(
 
"Tom Woods" <tomarse_@hotmail.com> wrote in message
news:mg6pi1lskifcic616rupc4ebea7g0i5349@4ax.com...

>>Can you lend your mum to Graham now - Emma is wearing out... :)
>
> I've been trying to get him to send him mum round here for a year or
> so to sort my 101 out. not worked yet :(

Mum did a cracking job of most of the stripping I have to say. It was
supposed to be Sis who did it as part of the deal for me doing all the
welding on JLO. I guess I work too fast! So credit where credit is due...
THANKS MUM!!!

As for the paint I thought it was suitably neutral so as not to look too
military (well as non military as a exmilitary 101 can get!) while still
being able to sneak in to the military show IYSWIM. Comes from watching too
many home improvement / sales programs, "Its a nice neutral blank canvas for
the next owner to make theiir mark on". Not that I'm planning getting rid or
owt.

The other bonus to the paint work on this occasion is I don't feel obliged
to flat off the coarse bits :0)

Lee D


 

"Mother" <"@ {mother} @"@101fc.net> wrote in message
news:iitoi1t3nrvsq5kpqq505b5kknpuu4utas@4ax.com...
> On Thu, 15 Sep 2005 20:35:57 +0100, "Lee_D"
> <newsgroupNOSPAM@NOSPAMlrproject.com> wrote:
>
>>I did consider the other day if it does get hot on long runs , turning the
>>wheel so that the offset is the other way around thus allowing more air
>>through.
>
> Like a funnel? I thought about this, also a scoop just under the
> front crossmember to force air up. Love the paint job so far, very
> dignified - I even expect the rivet counters to nod.
>
> Can you lend your mum to Graham now - Emma is wearing out... :)

I think given sufficient encouragement, othahalf might get the job done,
although its progress is getting slower and with increasing noise on startup
:eek:)

Nice job Lee, am aiming for a similar colour myself.

Graham


 
"Graham G" <NOSPAM@here.com> wrote in message
news:3p62ulF8plduU1@individual.net...

> I think given sufficient encouragement, othahalf might get the job done,
> although its progress is getting slower and with increasing noise on
> startup :eek:)
>
> Nice job Lee, am aiming for a similar colour myself.
>
> Graham

Paint man special offer 5 litres at £25, I was intending doing him limestone
gloss but at that price who could resist!. I also thing the gloss shows up
the "character" too much.

Lee D


 

"Lee_D" <newsgroupNOSPAM@NOSPAMlrproject.com> wrote in message
news:3p6e5cF8v001U2@individual.net...
> "Graham G" <NOSPAM@here.com> wrote in message
> news:3p62ulF8plduU1@individual.net...
>
>> I think given sufficient encouragement, othahalf might get the job done,
>> although its progress is getting slower and with increasing noise on
>> startup :eek:)
>>
>> Nice job Lee, am aiming for a similar colour myself.
>>
>> Graham
>
> Paint man special offer 5 litres at £25, I was intending doing him
> limestone gloss but at that price who could resist!. I also thing the
> gloss shows up the "character" too much.
>
> Lee D

Bargain. I was going to go for a sand colour with a satin finish. As you
said, bit too much character for gloss.

Graham


 
"Mother" <"@ {mother} @"@101fc.net> wrote in message
news:fe9ti1tnhknfppproqeim56i3jhgh0dnd7@4ax.com...
> On Mon, 19 Sep 2005 00:55:40 +0100, "Lee_D"
> <newsgroupNOSPAM@NOSPAMlrproject.com> wrote:
>
>>I also thing the gloss shows up
>>the "character" too much.
>
> Yeah, like this?
>
> http://www.101fc.net/lrfest-2005/lrfest2005-030.JPG
>
>
>

I'm eating a bag of crisps as I look... can't work out which looks better.

Lee D



 
In message <fe9ti1tnhknfppproqeim56i3jhgh0dnd7@4ax.com>
Mother <"@ {mother} @"@101fc.net> wrote:

>On Mon, 19 Sep 2005 00:55:40 +0100, "Lee_D"
><newsgroupNOSPAM@NOSPAMlrproject.com> wrote:
>
>>I also thing the gloss shows up the "character" too much.
>
>Yeah, like this?
>
>http://www.101fc.net/lrfest-2005/lrfest2005-030.JPG
>
>
If there was ever an advert to use matt paint, this must be it ;)

Steve.



--
Vehicle Painting Pointers: http://www.stephen.hull.btinternet.co.uk
Coach painting tips and techniques + Land Rover colour codes
Using a British RISC Operating System 100% immune to any Windows virus.
"Whatever is rightly done, however humble, is noble". Henry Royce
 
On or around Mon, 19 Sep 2005 12:50:31 +0100, Mother <"@ {mother}
@"@101fc.net> enlightened us thusly:

>On Mon, 19 Sep 2005 00:55:40 +0100, "Lee_D"
><newsgroupNOSPAM@NOSPAMlrproject.com> wrote:
>
>>I also thing the gloss shows up
>>the "character" too much.
>
>Yeah, like this?
>
>http://www.101fc.net/lrfest-2005/lrfest2005-030.JPG
>

that looks crap...

big mistake putting gloss on that one... You need one with straight panels
afore you can afford shinyness.

--
Austin Shackles. www.ddol-las.net my opinions are just that
Satisfying: Satisfy your inner child by eating ten tubes of Smarties
from the Little Book of Complete B***ocks by Alistair Beaton.
 
On Mon, 19 Sep 2005 14:44:31 +0100, Austin Shackles
<austinNOSPAM@ddol-las.net> wrote:

>big mistake putting gloss on that one... You need one with straight panels
>afore you can afford shinyness.

Yup. Thing is, having seen an ambi in gloss - with totally straight
panels, it does look the business (hence my comment on the site about
"being shotblasted first with bricks and pebbles" ;-)

 

"Mother" <"@ {mother} @"@101fc.net> wrote in message
news:fe9ti1tnhknfppproqeim56i3jhgh0dnd7@4ax.com...
> On Mon, 19 Sep 2005 00:55:40 +0100, "Lee_D"
> <newsgroupNOSPAM@NOSPAMlrproject.com> wrote:
>
>>I also thing the gloss shows up
>>the "character" too much.
>
> Yeah, like this?
>
> http://www.101fc.net/lrfest-2005/lrfest2005-030.JPG
>

LOL


 

"Mother" <"@ {mother} @"@101fc.net> wrote in message
news:1hgti1h82m5f590716ndbfh07aqr982v14@4ax.com...
> On Mon, 19 Sep 2005 14:44:31 +0100, Austin Shackles
> <austinNOSPAM@ddol-las.net> wrote:
>
>>big mistake putting gloss on that one... You need one with straight panels
>>afore you can afford shinyness.
>
> Yup. Thing is, having seen an ambi in gloss - with totally straight
> panels, it does look the business (hence my comment on the site about
> "being shotblasted first with bricks and pebbles" ;-)

Said owner tells me that nitromors wouldn't work (lack of patience I think)
so he used a scraper and heat gun. I recon he's warped the ally with the
heat, cos I've seen plenty of ambulances and rarely is every panel on it as
badly warped as that is. If it was a side or only a few panels I could
accept normal wear, but if you look hard enough, there isn't a straight
panel on it.

Graham


 
On Mon, 19 Sep 2005 19:08:12 +0100, "Graham G" <NOSPAM@here.com>
wrote:

>there isn't a straight panel on it.

Upto a certain, uniform height though...

How tall is Alasdair?

 
You must log in or register to reply here.

Similar threads

L
Oi closet 101 fans - DON'T LOOK
2
Replies
22
Views
2K
Austin Shackles
A
L
Stonleigh National 4x4 - Anyone?
Replies
5
Views
796
Nikki
N
L
Wooo HooOOOOO
2
Replies
30
Views
2K
Austin Shackles
A
L
Song stuck on my brain...
Replies
11
Views
1K
Mother
M
L
Smug gits hands up!
2
Replies
36
Views
2K
Simon Isaacs
S