X

XPETEX

New Member

• Mar 4, 2012

• #1

Hi,
This is my first post on here,
im running a landy 90 with a 200TDI engine dropped in with almost 300,000 miles on the clock. when running the brake pedal feels fine but when you turn it off it goes hard is this usual?
cheers Pete

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Mar 4, 2012

• #2

yes

 

X

XPETEX

New Member

• Mar 4, 2012

• #3

also how come stuff I type in connects to flea bay? don't get it...

 

X

XPETEX

New Member

• Mar 4, 2012

• #4

cool Thank you muchly

 

GRATCH

HUGE MEMBER

• Mar 4, 2012

• #5

If you have a brake servo, then yes.

 

X

XPETEX

New Member

• Mar 4, 2012

• #6

ok
never had it on any car I have owned is it sprung loaded?

 

blue beasty

Leaks an prone to bits dropping off

• Mar 4, 2012

• #7

when yer injun int running then yer servo don't work

 

X

XPETEX

New Member

• Mar 4, 2012

• #8

yeah I know that bit, normally the pedal should go hard on every vehicle if you pump it but on myn when you turn it off the pedal goes solid straight away, then once started drops to where it normally sits just seems a bit odd

 

L

lynall

Well-Known Member

Full Member

• Mar 5, 2012

• #9

Check the non return valve in the rubber hose from vac pump to servo, i think its built into the 90 degree fitting servo end.



Lynall