T-C · Aug 21, 2019

Hello,

I have a 1994 Soft Dash LSE. I'm trying to bleed the brakes. However, the ABS pump is no longer running. It did run on one of the first attempts at bleeding (which failed due to other issues), however I can't get the pump to run to finish bleeding.

When turning on the ignition, the pump does not run. The pump will run when power is directly supplied to it. The fuses and relays appear to be fine. Any ideas?

Datatek · Aug 22, 2019

T-C said:
Hello,

I have a 1994 Soft Dash LSE. I'm trying to bleed the brakes. However, the ABS pump is no longer running. It did run on one of the first attempts at bleeding (which failed due to other issues), however I can't get the pump to run to finish bleeding.

When turning on the ignition, the pump does not run. The pump will run when power is directly supplied to it. The fuses and relays appear to be fine. Any ideas?

Try the control relay and test the pressure switch for continuity.

T-C · Aug 24, 2019

Thanks for the advice. I switched the two relays under the front passenger seat around and the pump started working. Will order some new relays.

T-C

Member

Datatek

Well-Known Member

T-C

Member

Similar threads