T

timbr00

Member

• Dec 23, 2023

• #1

I recently purchased an ex mil 1985 model 110. the vehicle has a 200tdi engine installed and a snorkel fitted to passenger side which is not attached to the air filter.
I have purchased the 200tdi attachments and have a hole in the side of the wing however the blower fan is sitting part over the cut out so I cannot attach the internal ducting. any suggestions how to proceed?

 

A

Anaconda

Well-Known Member

• Dec 23, 2023

• #2

Son has a flexible pipe running under the heater box I do believe.

 

T

timbr00

Member

• Dec 23, 2023

• #3

could you let me know how this attaches to the internal side of the wing?

 

A

Anaconda

Well-Known Member

• Dec 23, 2023

• #4

If I remember correctly the snorkel pipe goes through the wing and the flexi pipe is held onto this with a jubilee clip.
Will try and have a look tomorrow.

 

T

timbr00

Member

• Dec 23, 2023

• #5

Thanks I would appreciate it. My snorkel has a cut out the size of the wing cut out

 

Attachments

• 
  IMG_4910.jpeg

  330.2 KB · Views: 111

A

Anaconda

Well-Known Member

• Dec 24, 2023

• #6

Hope these are of some help

 

Attachments

• 
  20231224_093310.jpg

  276.7 KB · Views: 97
• 
  20231224_093348.jpg

  267.2 KB · Views: 98
• 
  20231224_093427.jpg

  277.3 KB · Views: 111
• 
  20231224_093437.jpg

  313.5 KB · Views: 103