S

steve52

New Member

• Oct 24, 2007

• #1

Can anyone help please? I have a disco 200tdi in my old 90 and have currently plumbed in the disco air filter (its zip tied on top of the n/s inner wing. Im considering fitting a raised air intake (snorkel) but am a bit lost as to where the plumbing goes under the bonnet as there seems very little room to access the air intake panel where the snorkel attaches on the outside.
are there any kits to do this or does anyone have any cheap solutions?
thanks, steve

 

Griffdowg

New Member

• Oct 24, 2007

• #2

depends which snork you get. i take it your 90 doesnt have the holes in the side of the wing? which side is the air intake on? i suggest you look at taking the snork through the top of the wing and running to the air intake that way. if you get the kit for ther N/A engine from rebel4x4, there should be enough hose for you to get where you want to go. if not, then flexi hose is easy to come by.

G

 

S

steve52

New Member

• Oct 24, 2007

• #3

Yes - my truck has the holes in the side of the wings but the ducting for the heater intake to the top of the wing dont leave much room for access. The airbox is on the n/s wing.
steve

 

S

slob

Well-Known Member

• Oct 24, 2007

• #4

speak to grippa, he's wur resident snorkle eggspurt

 

Griffdowg

New Member

• Oct 24, 2007

• #5

all you need then is the 200tdi kit if you have the vent in the N/S wing. it works on 200tdi defenders so should be ok on yours

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Oct 24, 2007

• #6

is that the same fur a series too wiv 2.5 lump?