C

corgi2

New Member
Heloooooo landy fans!
got 90 td5 and thinking of fitting a snorkel- but which one? firstly will it make any differance to mpg, also should i get forward facing one which i take it forces air into engine when you are driving or should i get a mushroom shaped one, whats the differance? help i'm confused(my wife says i am quite often!!

cheers landy lovers
 
Get one that travels along the chassis, attaches to the brake lines and exits by the exhaust. It will be well away from the warm engine and wont catch on branches etc. There should be a 12.85% increase in mpg.
 
The mushroom type - if they are designed properly - function as a pre-cleaner. Very effective at removing dust and grass-seeds and bugs etc. before they hit the main air cleaner. They generate a centrifugal force which dumps the rubbish to the outside and out of the main air flow. These are extemely common in any equipment working in dusty conditions.

But not sure if you have much dust....... if not then probably not much difference.

And would'nt expect differences in fuel consumption - snorkels are about keeping crud (wet and dry) out of engines.

alanw
 
at last a good ansa, i know its a fun web site, but sometimes its good to get a straight ansa!!!!

Thanks alanw
 
corgi2 said:
at last a good ansa, i know its a fun web site, but sometimes its good to get a straight ansa!!!!

Thanks alanw
Click to expand...


I agree, you've been treated really harshly........I can't imagine the trauma of having to trawl through 3 whole posts before you get your answer :doh:
 
Can I add to the mayhem....

I have a 90 that we converted from 2.5NA (ex MOD) to a 200 TDi. Problem is there is no hole in the wing for the air inlet to attach to so I have the hose lying loose in the engine bay. I was thinking of fitting a snorkel but all the ones I have seen seem to attach to the wing via the grill hole. Is there anything out there that comes complete and will just allow me to cut a hole and attach the hose?
 
Airways said:
Can I add to the mayhem....

I have a 90 that we converted from 2.5NA (ex MOD) to a 200 TDi. Problem is there is no hole in the wing for the air inlet to attach to so I have the hose lying loose in the engine bay. I was thinking of fitting a snorkel but all the ones I have seen seem to attach to the wing via the grill hole. Is there anything out there that comes complete and will just allow me to cut a hole and attach the hose?
Click to expand...

southdown do a kit that goes through the top of the wing

http://www.ebay.co.uk/itm/Southdown...arts_Vehicles_CarParts_SM&hash=item4841cd1d23

http://www.southdown4x4.co.uk/
 
You must log in or register to reply here.

Similar threads

B
WANTED - Help Sourcing Genuine Land Rover Snorkel
Replies
0
Views
143
Bowler 90
B
O
Air intake replacement
Replies
2
Views
701
ostrich
O
andyjack
Snorkel help
Replies
16
Views
2K
dag019
dag019
L
Steering lock / alarm problem
Replies
1
Views
444
bankz5152
bankz5152
Gertrudethedefender
Engine to Radiator coolant hose replacement
Replies
17
Views
2K
Anaconda
A