Ric82

Active Member

• Jun 4, 2024

• #1

Hi Guys I have a Smiths Electrical Oil pressure gauge
https://www.johncraddockltd.co.uk/589137-no-longer-available-oil-pressure-gauge-series-3.html

just wondered if anyone knows where I can pick up a reasonably priced Oil Sender
https://www.ebay.co.uk/itm/32614105...Gld8S+ZUNyMkzgpm/jVQiTBpOv|tkp:Bk9SR9LBzaP8Yw

like this? And how its wired?

Many Thanks
Richard

 

steve2286w

Well-Known Member

• Jun 4, 2024

• #2

Yikes that’s a bit expensive , if you scroll down in that eBay page you see intermotor ones fir £30

 

Ric82

Active Member

• Jun 4, 2024

• #3

steve2286w said:

Yikes that’s a bit expensive , if you scroll down in that eBay page you see intermotor ones fir £30

Click to expand...

Thanks will that fit on a 2.25 diesel and give the correct readings? I assume i would also need to maintain the old switch to activate the light on the dash as well?

Thanks
Richard

 

steve2286w

Well-Known Member

• Jun 4, 2024

• #4

Not sure , but you could ring them, this looks like it’s suited to your gauge

Smiths Oil Pressure Sender For Classic Gauge Race Rally | eBay

For Smiths Classic Gauges. These oil pressure gauge senders are suitable for use with the Smiths electrical oil pressure gauges. SMITHS GAUGES . 1/8 NPT Thread. Not always. as you may require it in the event of a claim with your carrier.

www.ebay.co.uk

Holden do gauges, transmitters and adapters.

On mine I fitted a T piece adapter where the sender goes in , to use a mechanical oil gauge and keeping the switch to operate light

 

Ric82

Active Member

• Jun 6, 2024

• #5

Guys just to let you all know, I have found a Smiths oil pressure gauge on eBay for £20 so once I receive it and test it I will let you all know how I get on.

Many Thanks
Richard