D

Discovery Joe

New Member

• Jan 18, 2013

• #1

The previous owner of my TD5 D2 changed the air suspension out for coils, every now and then, the SLS warning light on the dash comes up and stays on until the car is restarted. is there a quick fix to deactivate the irritating light? as it serves no purpose. I tried disconnecting the height sensors but the light stayed on.

 

A

AussieDunc

New Member

• Jan 18, 2013

• #2

Might be that the parameters in the ECU are still set up for air on the rear

 

D

Discovery Joe

New Member

• Jan 18, 2013

• #3

Hmm, does that need to be sorted at a LR dealership or could i just get it checked out at a garage?

 

D

Discovery Joe

New Member

• Jan 18, 2013

• #4

I might just cover it up as it doesn't beep because the compressor has hade it's fuse and relay taken out, anyone know how to get behind the clear plastic in front of the instrument panel? cant see a way to it from underneath..

 

A

andrew j

New Member

• Jan 18, 2013

• #5

where are you ? , sure some one would knock it off proper for some beers tokens !

 

E

eightinavee

Well-Known Member

• Jan 18, 2013

• #6

The SLABS ecu just needs resetting to coil spring suspension.Two mins on Testbook or with some lesser device.

 

sierrafery

Well-Known Member

• Jan 18, 2013

• #7

eightinavee said:

The SLABS ecu just needs resetting to coil spring suspension.Two mins on Testbook or with some lesser device.

Click to expand...

Actually the warning lamp in the instrument pack needs to be disabled through the BCU but the main ideea is that dedicated tester is needed

 

E

eightinavee

Well-Known Member

• Jan 18, 2013

• #8

sierrafery said:

Actually the warning lamp in the instrument pack needs to be disabled through the BCU but the main ideea is that dedicated tester is needed

Click to expand...

Whatever.