C

Cyn

Member

• Jan 13, 2014

• #1

Hello from Costa Rica
Its a Discovery 2, 2000, TD 5, auto, ACE, and sadly at the moment-SLS! It wont lift. It has new sensors, new airbags, new compressor unit. I have a nanocom scanner. It shows no error though dash light is on. It also shows 5 V to right sensor and .02 V to left. When I disconnect sensor nanocom reading changes to the correct 5 V. When I swap right sensor to left side all the same reading occur. Can anyone help!

 

oxides

Well-Known Member

• Jan 13, 2014

• #2

Wrong type of series! This section is for older land rovers. Try reposting in the disco section.....

 

E

eightinavee

Well-Known Member

• Jan 13, 2014

• #3

Yes,and I'm not too proud to say its not worth fixing.Stick some coils on it and enjoy the reliability.Those who shout about how good SLS is can keep shouting,for any real benefit in ride quality the cost of upkeep and downtime means its just not worth it.

 

joe27979

Well-Known Member

• Jan 13, 2014

• #4

did you calibrate both ride sensors with the vehicle jacked up on the chassis to horizontal?

 

C

Cyn

Member

• Jan 13, 2014

• #5

Yes I did calibrate and I will try and post in correct section, but it sounds like you guys know the issues