Dan333

Member

• Mar 3, 2025

• #1

Hi can anyone tell me if I'm near enough to the mark check picture, this is a nightmare to do this seams to be the closest I can get, is it close enough, looking forward to your replys

 

Dan333

Member

• Mar 3, 2025

• #2

Dan333 said:

Hi can anyone tell me if I'm near enough to the mark check picture, this is a nightmare to do this seams to be the closest I can get, is it close enough, looking forward to your replys

Click to expand...

 

Attachments

• 
  IMG_20250303_101635.jpg

  306.3 KB · Views: 23

Dan333

Member

• Mar 3, 2025

• #3

Hi I can get it like the picture and same distance on the other side of 20 degs, is it possible to get it between thanks for replys in advance

 

W

Wildefalcon

Well-Known Member

• Mar 3, 2025

• #4

Doesn't look right to me.

 

Dan333

Member

• Mar 3, 2025

• #5

Wildefalcon said:

Doesn't look right to me.

Click to expand...

This is day 3 aaahhhhh

 

W

Wildefalcon

Well-Known Member

• Mar 3, 2025

• #6

Do you have the repair operations manual?

 

Dan333

Member

• Mar 3, 2025

• #7

Hi yes I have one, can I put it like in the picture and adjust the pump to suit

 

steve2286w

Well-Known Member

• Mar 3, 2025

• #8

Hi Dan
Nowhere near I'm afraid , what I did with mine was to work out how much it turns as you lower the housing onto the cam gear and adjust for that , think I also turned the oil pump spindle with home made tool incase that was twisting it out of alignment

 

Dan333

Member

• Mar 3, 2025

• #9

Hi thanks for your reply,I have been turning the oil pump spindle the nearest I can get is 10degs either side of the 20 degs, I'm starting to doubt if it will sit in between the two either side of the 20 degs, thanks for your help