conor1n
Member
Hello all
I have just recently acquired a 2005 4.2 SC L322 in Silver, for £2k
What's totally mental about this purchase is that I don't have a massive amount of detail on the car. I haven't actually seen the interior at all and only a couple of not great photos of the exterior at odd angles. I have been told it's "very clean"
Oh and it has 162k miles on the clock.....
After some initial research here is what I am currently thinking
I haven't actually received the car yet too...
I have referred to DIY as I am kind of into that. I have a decent tool setup and have done various jobs on my MB. I am also restoring a Renault Clio 172 Cup track car which has thought me a load and given me plenty of confidence. You can find that build here if curious. https://www.mig-welding.co.uk/forum/thread...car.111627
I have just recently acquired a 2005 4.2 SC L322 in Silver, for £2k
What's totally mental about this purchase is that I don't have a massive amount of detail on the car. I haven't actually seen the interior at all and only a couple of not great photos of the exterior at odd angles. I have been told it's "very clean"
- I do know the suspension is bust (on bump stops) due to water ingress during a recent car wash episode. The water has been identified as coming in one of the rear doors (side or tailgate).
- The remote locking had supposedly stopped working but that has been referenced as fixed.
- Also only one key (hate that!)
- According to recent MOTs the rear subframe bushes are outstanding and nearside non-obligatory mirror is damaged (god knows how bad and the price of what I guess is a wing mirror)
- The rear video screens aren't working.
- Rear cameras and parking sensor work 90% of the time.
- It also has "superficial" rust in the usual rear quarters. No idea about the tailgate.
Oh and it has 162k miles on the clock.....
After some initial research here is what I am currently thinking
- Suspension is due to compressor getting shorted/wet. Considering that, the suspension system has shut down and won't raise because it knows the compressor is bust. The compressors needs test/refurb/renew and errors cleared and should work (big a** guess!!) - DIY
- I can get a new spare key programmed for £100
- Rust is a cut/weld/fill/spray job - DIY final spray might be pro depending on impact (silver is difficult to match)
- I believe the wires to rear screen were incorrectly routed under seats around 2005ish. I believe those wires are probably sliced and can patched up.
- No idea on rear camera + sensors
- Rear subframe bushes are a brutal job but i'll still DIY them.
I haven't actually received the car yet too...
I have referred to DIY as I am kind of into that. I have a decent tool setup and have done various jobs on my MB. I am also restoring a Renault Clio 172 Cup track car which has thought me a load and given me plenty of confidence. You can find that build here if curious. https://www.mig-welding.co.uk/forum/thread...car.111627