oilydan said:
Now what about the ash tray? What can I print to go in that space? Someone has already come up with a simple coin/key tray, I might see if I can convert it to a phone holder/charging pod, or a gauge pod, cup holder,
Click to expand...

How about a holder for a Nanocom? I removed the ashtray and mount and used to wedge the Nanocom diagonally across the hole. I have made a holder from a chunk of wood but have decided to re-do it to orient it towards the driver.
 
I've opened up a brand spanking new tube out of the bag for you. It is definitely 45mm ID. I can post it to you if it would help
 
Helpful, but I don't think it is required, thanks. I'll work off 45mm for now and I'll be test fitting in my dash anyway.

So the Mud coin tray is 17 odd quid. I can print my own for about 50p worth of filament and 10 minutes design time. I might do one just to tide me over until the phone dock is done.

So the phone dock - hard wired or external wire dangling over the dash? Hard wired would involve removing the dash to install, external wire would just slot in but not be as neat....

iPhone 5/6/7? plus? Nokia 3310?

Do that many have Nanocom units that there needs to be a holder made for them, or is that a one-off? If you send the dimensions of it in mm I can make you a one-off.
 
Repaired the printer, added black filament and printed these today....

Vent fits in a 16mm hole (because that's the size of my hole saw :) :

IMG_0654.jpg


And the adapter for the feed, 45mm OD pipe fits the inlet and it has a 45mm ID for fitting to the bottom of the vent.:

IMG_0653.jpg


Took 7 hours to print.
 
Add me onto the list for a set please! Great work by the way.
What 3D Printer have you got / what's your set up? Considering getting one for my lad's birthday - his 15th. What do you reckon?
 
Would be interested in an astray alternaitive, lumia 640 ? Or a shotgun cartridge or bullet holder
 
I will be back in the UK in 2 weeks and have a set of the pipe air-flow splitters/vents to give to whomever can convince me that they will be fitting them for testing the soonest :) I would do it myself but I have a full program of Weddings/Christenings and, after sitting in a sandy hole for a few weeks, I have much beer to drink. No time for Landrover based tomfoolery.

I printed a lovely iPhone 4 holder for Mrs Oilydan that fit snugly into the ashtray hole, then she broke both 4s that we had thus making it obsolete, if anyone wants this - first come etc. It has a cutout for gluing a charging lead so can be hard-wired as charging dock. She now has a sparkly new 7s Plus but it has a case so cannot print a generic holder for it so I have done myself a coin/garage doofer tray.

I think the next thing is central locking. I have added to the front doors already but need to get the rear lock changed. Then I'll be printing the mechanism, pivots/arms to fit a solenoid in the back door.
 
oilydan said:
I will be back in the UK in 2 weeks and have a set of the pipe air-flow splitters/vents to give to whomever can convince me that they will be fitting them for testing the soonest :) I would do it myself but I have a full program of Weddings/Christenings and, after sitting in a sandy hole for a few weeks, I have much beer to drink. No time for Landrover based tomfoolery.

I printed a lovely iPhone 4 holder for Mrs Oilydan that fit snugly into the ashtray hole, then she broke both 4s that we had thus making it obsolete, if anyone wants this - first come etc. It has a cutout for gluing a charging lead so can be hard-wired as charging dock. She now has a sparkly new 7s Plus but it has a case so cannot print a generic holder for it so I have done myself a coin/garage doofer tray.

I think the next thing is central locking. I have added to the front doors already but need to get the rear lock changed. Then I'll be printing the mechanism, pivots/arms to fit a solenoid in the back door.
Click to expand...

I will be taking my dash apart soon to fit the twin washer mod so could trial your kit whilst it's in bits
 
OK, so I do have 2 sets (I was keeping one for myself but can always print more).

If you guys PM me your addresses I'll send them off to you when I get back in a couple weeks.

I think you will need some 15mm ID tubing to pipe the warm air to the window vent.....
 
Yeah, mine does too, I was just being silly.
I'll attempt to fit them before LZ12 so others can see at the meet up?
 
You must log in or register to reply here.

Similar threads

mjr92
Rear sliding side windows
Replies
1
Views
228
julianf
julianf
dag019
Help "breaking in" to a second row door
Replies
8
Views
553
dag019
dag019
julianf
Options for getting rid of 110 windows?
Replies
14
Views
2K
Dr Strangeglove
D
R
LED side lights not working
Replies
9
Views
628
RickyFreelander
R
T
Disco 1 Uneven 3D seat base?
Replies
0
Views
322
tomke92z
T