S

sniggib

New Member

• Sep 19, 2009

• #1

hi,
i have a land rover 90 (1987) and am replacing both of the side indicators. The indicators that are on the vehicle and the replacement ones both have bolts fastened into gthe plastic which then go through the side wing and are then bolted from the other side. However where they appear is between the wing and the wheel arch. Is there an easy way of attaching/removing the indicators other than taking wither the wing or the wheel arch off? if not wich is easier to remove wheel arch or wing?

cheers

matt

 

Pikey

Dummy Ejection Facilitator..

• Sep 19, 2009

• #2

loosen the plastic arch liner and stick ya hand up.

 

S

sniggib

New Member

• Sep 19, 2009

• #3

do the push in rivet like things that hold the plastic whel arch liner push back in? or will i need some new ones to put in once ive taken it off?

cheers

matt

 

Pikey

Dummy Ejection Facilitator..

• Sep 19, 2009

• #4

sniggib said:

do the push in rivet like things that hold the plastic whel arch liner push back in? or will i need some new ones to put in once ive taken it off?

cheers

matt

Click to expand...

yes if you're careful and don't lose the inner pins when yu push em out. But for what they cost I'd just buy noo ones

 

baggyjim

New Member

• Sep 20, 2009

• #5

redhand said:

yes if you're careful and don't lose the inner pins when yu push em out. But for what they cost I'd just pikey some noo ones

Click to expand...

thats not a good way to train a nubee