StuntmanAd

StuntmanAd

New Member
Made up my own side exit exhaust for my 200tdi powered series 3 this weekend. I'm happy with it :)

DSC00092.jpg


DSC00096.jpg


DSC00097.jpg


DSC00095.jpg


[nomedia="http://www.youtube.com/watch?v=Pg9nuGhPtJE"]YouTube - Land Rover Series 3 200tdi side exit exhaust[/nomedia]

[nomedia="http://www.youtube.com/watch?v=ZXnZq0noztw"]YouTube - Land Rover Series 3 200tdi side exit exhaust[/nomedia]

:)
 
Not that it will make any difference to a landy all exhaust bend should be curves not 90deg
It will restrict the gas flow but like I said not a big deal on a landy
Nice pipe given me some ideas for mine once I get the v8 in twin side pipes
You think it's a bit overboard if I use chrome side pipes like cobra lol
 
Yer I know a 90 bend isn't ideal but I thought as the pipe is as big a bore as the turbo outlet and theres no silencers to hinder flow it wouldn't really hurt much :p

Watching that video back I can't help but think it's got a bit of a missfire when revving up, most noticeable at 21 and 25 seconds in on this video [nomedia="http://www.youtube.com/watch?v=Pg9nuGhPtJE"]YouTube - Land Rover Series 3 200tdi side exit exhaust[/nomedia]


It does seem a little slow too, I can't imagine the engine hauling a discovery around at an acceptable speed for a 90s 4x4.... My other car is 300hp so maybe I'm just asking too much from the old derv :p
 
If you have put a 200tdi onto the standard transmition and axles then it's gonna be about the same as it was with the standard engine
The 90 and disc use the lt77 and l230 transmition which has high gear ratios givin a better top end at lower engine speed
 
[nomedia="http://www.youtube.com/watch?v=4ZIAY46sgVc"]YouTube - Land Rover Series 3 200tdi side exit exhaust[/nomedia]


:)
 
more impressed with the weld from from the mild to the cast. last one i made was from old propshafts and a turned flange for the turbo.
will try an find the pics i took.
 
found them. eventually.
200tdi series downpipe 1.jpg
200tdi series downpipe 2.jpg
200 tdi series downpipe 3.jpg
200 tdi series downpipe 4.jpg

edit.........ignore the state of the bench......tis not allus like this!!
 
Is'nt a pavement side exhaust illegal, on the basis of fumes being "bellowed" into cyclists/pedestrians etc.

Looks good, but just a thought.


Mark
 
markconnor33 said:
Is'nt a pavement side exhaust illegal, on the basis of fumes being "bellowed" into cyclists/pedestrians etc.

Looks good, but just a thought.


Mark
Click to expand...

had this at a tesing station years ago, tester had the book out to check.
he wanted to fail it, but couldnt find any info saying it cant be done.

so he had to pass it!
 
As far as I remember it don't matter where the exhaust exits the vehicle as long as the tail pipe end is flush or out from under the body and the nobody can cut orburn themselves on it as the pass
 
I'm about to do this but coming out through the bodywork so looks neater. Hoping to belch fumes into arsehole cyclists faces:)
 
I made one up for my 88" which has a 200 tdi. Used the rear box & tail piece from a 19j 90 and a small length of flexi pipe;)
 
i've given up making exhausts... last one i made ended up coming off on the M1 the next day :(


Think i need to invest in a bigger welder!

Need one before the next MOT though as it's currently a bit short! :)
 
S3hooke said:
I'm about to do this but coming out through the bodywork so looks neater. Hoping to belch fumes into arsehole cyclists faces:)
Click to expand...

That's what I've done with mine,it follows the original route of the standard system but then exits through the body behind the offside rear wheel

ec1da248.jpg


d2c32164.jpg
 
Bump said:
i've given up making exhausts... last one i made ended up coming off on the M1 the next day :(
Think i need to invest in a bigger welder!
Need one before the next MOT though as it's currently a bit short! :)
Click to expand...


I'm really sorry but that made me lol! I woulr have stopped and walked back up for it lol!!
 
You must log in or register to reply here.

Similar threads

Mack1
New to landy zone
Replies
6
Views
746
brianp38dse
brianp38dse
C
Fuel Lines Diameter
Replies
10
Views
522
Anaconda
A
H
Swap grill and headlights from 2A to 3
Replies
4
Views
791
Tony Monsantoe
Tony Monsantoe
W
Land Rover series 3 Daihatsu diesel
Replies
8
Views
436
tottot
tottot
Ekenoos
Oil filter parts not mentioned
Replies
10
Views
630
Ekenoos
Ekenoos