AndyTheLandy(Tom)

Member

• Oct 28, 2018

• #1

so.. is a side exit exhaust possible on a landrover series 3. wanted to try do it to mine just for a laugh really lol. thought i could get some pre cut and welded 90 degrees exhaust pipe and just set it to come out the side of a sideskirt ? anyone done it. would love to see some pics of how other people have done it , where the ehxaust comes out, and the actual exhaust (how to connect it to the origanl front tube

 

Mick Guilbert

Well-Known Member

• Oct 28, 2018

• #2

Never done it myself but if you can do it on a 90 I don’t see why you can’t on a Series. Good luck.

 

tottot

Well-Known Member

• Oct 28, 2018

• #3

Been done done many a time,and as you describe was the most common way. Hope you and your passenger like noise though.

 

R

Remora107

Well-Known Member

• Oct 28, 2018

• #4

I thought they all came out of the factory with the exhaust exiting on the side . The right hand side at the back !

 

R

rob1miles

Well-Known Member

• Oct 29, 2018

• #5

Be carefull about exhaust getting back in while you drive. You don't want to get headaches on long journeys. LR were very carefull about where the exhaust comes out because series could be used open top and the rear doors and hard top don't fit very well.

 

dag019

Well-Known Member

• Oct 29, 2018

• #6

rob1miles said:

Be carefull about exhaust getting back in while you drive. You don't want to get headaches on long journeys. LR were very carefull about where the exhaust comes out because series could be used open top and the rear doors and hard top don't fit very well.

Click to expand...

You notice that even with the standard exhaust. With the back of the canvas rolled up you will occasionally get a nice whiff of diesel fumes to remind you the engine is running. But it has never been a problem over long journeys. This is however possibly because the large gaps allowing the fumes in also allows for enough ventilation to also flush them out.

 

J

John S

Well-Known Member

• Oct 29, 2018

• #7

X1 on this. WTF do want to do this? Fair enough if you're competitive off roading.
It's designed to exit to the rear behind the back tyre why is that a problem?

The exhaust is in three sections. To achieve any kind of customised fit you'd need to exit behind the passenger door where the middle section connects. Quite why you want to do this is totally unclear, but it sounds totally naff .

 

tottot

Well-Known Member

• Oct 29, 2018

• #8

Stick it out of the wing and up the screen pillar tractor style or if truck cab out behind the cab lorry style.

 

Bobsticle

De Villes Advocaat

• Oct 30, 2018

• #9

A nice Stevenson’s rocket funnel on the bonnet would be nice but lifting the spare over it would take two of you.

 

AndyTheLandy(Tom)

Member

• Nov 6, 2018

• #10

tottot said:

Stick it out of the wing and up the screen pillar tractor style or if truck cab out behind the cab lorry style.

Click to expand...

oooo never thought of that . being a farmer to would suit me lool

 

AndyTheLandy(Tom)

Member

• Nov 6, 2018

• #11

Bobsticle said:

A nice Stevenson’s rocket funnel on the bonnet would be nice but lifting the spare over it would take two of you.

Click to expand...

teh spare is in the back so all good