BECM is v39 apparently.
How do you enter the code / disable the imobiliser/eka ?

I suspect that my issue is that I have the wring code :(
 
I agree but the evidence says otherwise and wasnt there a spark when you connected it?
 
awkwardbob said:
Hi, yes the RF Receiver is fully connected (I now have 2x Mk3, green dot ones !).

the battery is only reading 12.1V so I wonder if I should give it a little love.

I’m concerned that there are 2 EKA codes scribbled in the handbook, why would that change ?

can a dealer access read the EKA code from the becm if that has been changed snd not re-synched with the VIN ?

thanjs again

Bob
Click to expand...
Is one EKA code and other radio code Thats what I have in my handbook
You have turned key in lock to left 4 times before entering EKA haven't you. This lets car know the EKA is going to be entered
 
Rubberknees said:
Is one EKA code and other radio code Thats what I have in my handbook
You have turned key in lock to left 4 times before entering EKA haven't you. This lets car know the EKA is going to be entered
Click to expand...

Hi, yes there are two EKA codes handwritten in the users guide, and a different radio code too.

I’m sure if I could understand the process better, I could work it out. There just seem to be some variables I can’t quite get my head around, like why does it sometimes beep with every key turn and at other times sound the alarm if the door is opened.

and I still need to work out why the battery drained in the first place.

let’s hope JLR come up with the goods in the shape of a working code. -I’ve tried the two I have both with key entry and by trying to enter it in nanocom -although I may be doing that wrongly.

sorry, I’m rambling. ‍
 
awkwardbob said:
Hi, yes there are two EKA codes handwritten in the users guide, and a different radio code too.

I’m sure if I could understand the process better, I could work it out. There just seem to be some variables I can’t quite get my head around, like why does it sometimes beep with every key turn and at other times sound the alarm if the door is opened.

and I still need to work out why the battery drained in the first place.

let’s hope JLR come up with the goods in the shape of a working code. -I’ve tried the two I have both with key entry and by trying to enter it in nanocom -although I may be doing that wrongly.

sorry, I’m rambling. ‍
Click to expand...
Tis Ok see what JLR come back with then we'll take it from there
 
Rubberknees said:
Tis Ok see what JLR come back with then we'll take it from there
Click to expand...
Aha !
I found how to try and ‘disarm’ in nanocom.
It’s in the utility menu.

somi pooped in the EKA code and it said it had worked -ie. it told the BECM to disable the alarm -so I know I’ve got the right code.

I thought this would let me sync my keys.

but it didn’t and I now have the Keycode Lockout message on the display.

so, one step forwards....
 
awkwardbob said:
Aha !
I found how to try and ‘disarm’ in nanocom.
It’s in the utility menu.

somi pooped in the EKA code and it said it had worked -ie. it told the BECM to disable the alarm -so I know I’ve got the right code.

I thought this would let me sync my keys.

but it didn’t and I now have the Keycode Lockout message on the display.

so, one step forwards....
Click to expand...
Key code lockout on dash means too many attempts made to unlock. First time you have to wait 30 mins for it to clear then longer and longer each try. I personally would now wait til morning for it to clear then try again
 
Rubberknees said:
Key code lockout on dash means too many attempts made to unlock. First time you have to wait 30 mins for it to clear then longer and longer each try. I personally would now wait til morning for it to clear then try again
Click to expand...
Aye don’t worry, the beeping will annoy the neighbours.
at least I know the code is right as when I popped it in wrongly it told me the EKA was wrong.

it seems the gash info: French, LHD, Manual, etc may be down to low voltage (from a spanking new battery) will give it a good charging too and see what tomorrow brings
 
awkwardbob said:
Aye don’t worry, the beeping will annoy the neighbours.
at least I know the code is right as when I popped it in wrongly it told me the EKA was wrong.

it seems the gash info: French, LHD, Manual, etc may be down to low voltage (from a spanking new battery) will give it a good charging too and see what tomorrow brings
Click to expand...
Heading in the right direction. You'll get there
 
brianp38dse said:
Hopefully that will open ok
Click to expand...
Brilliant, Thank you !
oh and from the nanocom manual:

400A903E-42DA-4D7B-8498-159A3511F3F1.jpeg
 
Success !!!

The nice chap from JLR Historic vehicles came back with a third (different!) EKA code and one for the (long gone) radio.

tried inputting via the lock but no joy.

nanocon, however, is your friend.

Just in case anyone else ends up in this pickle here’s how to do it:

get in car, lock all doors manually.
Key in ignition but not turned
Fire up nanocom and navigate to:
P38/Gems/BECM/Utility
On the last page of utility, there’s the disarm option.
Enter the EKA and press Disarm
If it works, all the doors will unlock and you can resync the key in the usual way (unlock while pressing button for 5, turn to unlock and hold button for 5)

feel like I got out of jail there !

suspect I should look into a second key !

thsnks everyone for all the help, support and advice -this community really is a wee goldmine !
 
Yea
marjon said:
Well done for sticking in there:)
I wonder how many others are running around with what they think the correct EKA:)
Oh hang on that might be me:oops:


and a new door lock:D
J
Click to expand...

yeah it’s a worry that the ‘right’ code didn’t work with the lock !

maybe I rushed it or something
 
I should also note that the BECM settings in nanocom now make sense, although the ‘Police’ option seems to be selected and probably shouldn’t be.

The BECM is unlocked and now shows the EKA and the fob code
 
You must log in or register to reply here.

Similar threads

awkwardbob
L322 2003 L322 Can’t open bonnet -battery flat
2
Replies
26
Views
774
awkwardbob
awkwardbob
Roverdrive
L322 L322 Battery strangeness
Replies
16
Views
1K
kermit_rr
kermit_rr
jimmacD
1999 P38 RF receiver is missing?
Replies
12
Views
1K
Grrrrrr
Grrrrrr
R
P38A I’ll be first person ever with a fob Sync problem 😂 help please!
2 3
Replies
46
Views
5K
Rsjohnb
R
sonicm1etn
intermittent completely dead fault TD5 D2
Replies
7
Views
452
Shedload
S