OBI the one you posted does not suit a servo pedal assembly hence had to alter to make it fit. see pic standard pedal set up it goes on middle set of bolts as pedal does not travel as far.
Interested in pics of carlos set up.

Oh, interesting and my apologies. Looks like I am in for some challenges when I receive the one from Ebay... Thanks for explaining. I'll keep you advised as to my results. So far, I've only got the one working above the pedal box under the bonnet. Thanks again, and sorry if I misled anyone.
Mike

hi sorry for the late reply i'd forgot i'd replied to this
anyway better than a picture a video of mine

Cheers Carlos looks a bit neater than my modified non servo version.

Carlos - thanks. Great job. So I got my Land-Rover-style set up of the same arrangement (see picture), and tested the size and fitting yesterday (without removing the bolts). Blackburn and you are correct. The standard arrangement will not allow the brake switch button to reach the brake pedal. So I would have to attach something to the pedal sticking up so it would contact my switch (which I will not do), or create the modified bracket like you did.

https://alexatesting.blogspot.com/2018/11/alternate-brake-light-switch.html

As of the moment my regular brake light switch atop the pedal box under the bonnet works fine, so all is well. But I'm going to keep this little alternative project on the back-burner of my mind. I loved your video Carlos! Thanks!
Mike