W

William Simpson 109 2.5td

Member

• Jul 1, 2018

• #1

I

 

Trench Rat

Well-Known Member

• Jul 1, 2018

• #2

Interesting...

 

W

William Simpson 109 2.5td

Member

• Jul 1, 2018

• #3

Can some 1 give me some info as in ages of these gearboxes

 

Attachments

• 
  20180701_180054.jpg

  292.2 KB · Views: 155
• 
  20180701_161438.jpg

  489.8 KB · Views: 182

Trench Rat

Well-Known Member

• Jul 1, 2018

• #4

@jamesmartin will probably know.

 

W

William Simpson 109 2.5td

Member

• Jul 1, 2018

• #5

Thanks

 

Blackburn

Well-Known Member

• Jul 2, 2018

• #6

The number you have shown is a casting number ie part identifier when they make the components. Is there any numbers stamped on the edge of transfer case. as seen in attached pic or stamped any where else.
A photo of the drivers side of selector box will also help ie the bolts holding the reverse stop spring plate differ on Suffix D box.

 

Attachments

• 
  DSCF0507 (600 x 450).jpg

  53.8 KB · Views: 132

W

William Simpson 109 2.5td

Member

• Jul 2, 2018

• #7

 

W

William Simpson 109 2.5td

Member

• Jul 2, 2018

• #8

This any good

 

jamesmartin

Well-Known Member

• Jul 2, 2018

• #9

William Simpson 109 2.5td said:

This any good

Click to expand...

s3 a suffix std box,thats not the one in the chassis in pics is it ?

 

Blackburn

Well-Known Member

• Jul 2, 2018

• #10

As your clutch is hydraulic on drivers side I believe that makes it a Series 2A box Suffix A is the version.
If it is a Series 2 I believe it would have the mechanical clutch linkage.
Have a read of this as Series 2 gearboxes went up to suffix E.
http://www.expeditionlandrover.info/gearboxes.htm
It mentions series 2A boxes being stamped with an S.
Have you driven it does it have synchromesh on all gears.

 

jamesmartin

Well-Known Member

• Jul 2, 2018

• #11

Blackburn said:

As your clutch is hydraulic on drivers side I believe that makes it a Series 2A box Suffix A is the version.
If it is a Series 2 I believe it would have the mechanical clutch linkage.
Have a read of this as Series 2 gearboxes went up to suffix E.
http://www.expeditionlandrover.info/gearboxes.htm
It mentions series 2A boxes being stamped with an S.
Have you driven it does it have synchromesh on all gears.

Click to expand...

thats why i asked about the pic as number is series 3, suffix e series 2a boxes are all synchro too and basically the same box as a suffix a series 3,suffix e is when side mounted slave changed to slave bolted direct to bell housing

 

W

William Simpson 109 2.5td

Member

• Jul 3, 2018

• #12

Haven't drove it .it was a project already started I bought. Looked the other gearbox could find a number stamped like that on it

 

R

rob1miles

Well-Known Member

• Jul 6, 2018

• #13

That box in the first picture has the top filler cap. Is the crossmember removable?

 

W

William Simpson 109 2.5td

Member

• Jul 7, 2018

• #14

No.cross member welded in