julianpeace

julianpeace

New Member
i am trying to find out what the v6 came from and what year it is. for in the future so i can get parts

i have been on so many websites but no luck. anybody know a good site.
i know that it is a colonge 2.8. carb fed. but that is all
the number that i have is JB96256
is that right for a engine number
 
well i have the 3.0 v6 ford and is it good
HELLYEA ! that engine number is right !
have you taken of the inlet maniffold as you can tell what year it is by looking at that if so explain what they looked like wwere they D shaped or were they 0 shaped or Uwith a top shaped??

need any help just shout
 
have not taken off the inlet manifold.
but is there anyone who knows what year this engine is just by the number?
 
are you sure its a 2.8 and not a 3.0 litre, that injin number seems like a 3 to me. i had one fitted in a series 3 i used to race many years ago, they go like fook ;)
 
well in the log book for the car it has this number for the car and it says it is a 2.8. but you never know. how can i find out. is there a company that will be able to tell me??
 
the dissy is on the back of the engine. i know that it is a 2.8 lt colonge.
but i am after what year my engine was built and what it came out of so that i can get parts for it alot easyer in the future
 
i recon as its a carb it came out of a granada , if you can borrow or buy a manual , it should tell you what the engine code is , that will tell you the year ,
 
Yup, the 2.8 will be from a Granada GL probably as the Ghias were mostly EFi motors (like the Crapi 2.8). Get the right exhaust and it really howls between 5 and 6k rpm :D
 
Just checking the anals of history, and yes, the 3l is the ubiquitous Essex V6 as used by TVR and Marcos, the Cologne was fitted to Grannies, Crapi 2.8i and later developments went into the Sierra XR4i and XR4x4. The only carbuerettored versions were fitted to the Grannie mk II from 1977 onwards. Later models from about 1982ish were all fitted with Fuel Injection, so that should narrow down your search when looking for parts. The Cologne engine was in production right up until 1995, so there are plenty around.
 
Have you tried Gaydon Heritage Motor Centre?

There were several vehicles using this engine,but any decent auto factors will come up with the right parts .
How do think Kit Cars exist?>
Gaydon should be able to help.
Have you tried emailing all or some of the vehicle clubs whose vehicles used
the engine in question.
 
no i have not tryed any of the clubs as yet. i did not know where to start. but now i have a few ideas thanks to everyones replys.
 
You must log in or register to reply here.

Similar threads

1
Help on Series 1
Replies
11
Views
766
Hicap phill
H
A
Series 3 Chassis Number
Replies
5
Views
752
Wildefalcon
W
S
Series 3 ignition housing
Replies
2
Views
290
sueg
S
P
Series 3 How would you go about finding a Series 3 Landy? Q631 EGV
Replies
0
Views
430
patricksum
P
G
Anyone got a totally original Series Vehicle ?
Replies
5
Views
445
grewth
G