broada28

Active Member

• Aug 1, 2011

• #1

hi this is my problem
when i indecate right the:
side lights+tail lights+right indicators front and back
all flash
and when i turn on the side lights using the standard switch
the same set of lights stay one even when i disconect the earth to them

also the head lights only get high beam

when i siginal left that is fine
i have tryed the wiring diagram and still havent worked it out


can enyone please help

 

jamesmartin

Well-Known Member

• Aug 1, 2011

• #2

faulty earths ,earthing through other lights

 

broada28

Active Member

• Aug 1, 2011

• #3

jamesmartin said:

faulty earths ,earthing through other lights

Click to expand...

i have checked all the earths and they are all separate going to the chassis

the lights are new + the stalk is also new

any ideas

 

jamesmartin

Well-Known Member

• Aug 1, 2011

• #4

tis possible for two dip beams to fail coincidentaly ,and poor new switch especially if pattern but you must have poor earths in light holders etc

 

broada28

Active Member

• Aug 1, 2011

• #5

jamesmartin said:

tis possible for two dip beams to fail coincidentaly ,and poor new switch especially if pattern but you must have poor earths in light holders etc

Click to expand...

Checked all the lamps using multiple metre, on the back of the light switch I have top to bottom
Red single
Brown
2red and black
Blue which goes to the indicator stalk
Is this ok

 

broada28

Active Member

• Aug 1, 2011

• #6

I have taken off the red and black wires of the switch and now the front lights are working as they should but non of the back ones are yet

 

broada28

Active Member

• Aug 1, 2011

• #7

jamesmartin said:

tis possible for two dip beams to fail coincidentaly ,and poor new switch especially if pattern but you must have poor earths in light holders etc

Click to expand...

Thanks it turned out to be a broken green and White wire that goes to the back.
Thanks for the advice

 

oxides

Well-Known Member

• Aug 1, 2011

• #8

Have a look in the land rover manual - there's a diagram of the rear dash panel showing all the connections and colour codes.