Shortcut

New Member
Hi,
I am after some advice regarding fitting an exhaust to a SWB series V8 with an LT77 / LT230. I have just found the right manifold to clear the steering arm and have solved that dilemma, the next one is which way to route the exhaust. And ideas or photos would be appreciated.
 
Hi,
I am after some advice regarding fitting an exhaust to a SWB series V8 with an LT77 / LT230. I have just found the right manifold to clear the steering arm and have solved that dilemma, the next one is which way to route the exhaust. And ideas or photos would be appreciated.
Ok, then from now on I assume that the the pipe will go above the crossmember to the mid muffler onward and over the rear axel to the tail pipe box an exit.
I doubt you will find a system already manufactured, so the simples no dilemma method in my opinion, would be a system provided by a specialist exhaust builder so boxes, joint flanges and impotently the exhaust pipe hangers are in the correct position, and more than likely fitted by them. So
Go for a stainless system for a ‘fit & forget’ system
 
Hi, I have a system from Jake Wright that fits standard R/R Classic manifolds sounds great. I could get some pics later if that would help.
 
Hi, I have a system from Jake Wright that fits standard R/R Classic manifolds sounds great. I could get some pics later if that would help.
Hi, that would be a great help, I am going to have a go at TIG welding so after some ideas on the system.
 

Similar threads