minecab

Active Member

• Dec 22, 2019

• #1

I have a 66 series 2a that has no temp gauge fitted and a plug in the head near the thermostat housing.
I have a gauge from a series 3 that fits in the blank space on the instrument cluster but the sender from a series 3 is a slighter smaller thread than the plug hole in the head. Can anybody tell me the part number of the correct sender or adaptor please.

 

ExMil109

Active Member

• Dec 22, 2019

• #2

According to the manual, you need these parts (and a bit of plumbers' PTFE tape or thread sealant):

 

Blackburn

Well-Known Member

• Dec 22, 2019

• #3

The probe earths through the threads your better off with a paste sealant which should allow metal to metal contact.

 

minecab

Active Member

• Dec 23, 2019

• #4

parts ordered. the adapter is a bit pricy