M

mark86_02

New Member

• Oct 6, 2006

• #1

Hi all, Just wondered if anyone could tell me wether there is supposed to be a gasket between the oil feeder pipe, (the one with the oil breather on). amd the engine block itself as i have an oil leak originating there Also just wondered if anyone could clear this one up for me, Does a 1966 series 2a have to take an emmissions test when it takes the annual MOT test, if so what does this include (Also, Why the has my enter key on the key board stopped working) thanks Mark

 

ormus

New Member

• Oct 6, 2006

• #2

cant remember exactly, but fairly sure there is no gasket there.

re the KB. its probably shot. ive got a new one here for sale. a quid to you plus PP.

 

M

mark86_02

New Member

• Oct 6, 2006

• #3

if there is not a gasket there what damage would it do putting a gasket there
and if it comes to it, how much would pp be

mark

 

ormus

New Member

• Oct 6, 2006

• #4

depends where you are for pp?


and yes a gasket/goo wont hurt it.

 

M

mark86_02

New Member

• Oct 7, 2006

• #5

ok well ill try fitting a gasket first i think that should do the trick, then theres the rest of the landrover to get on with

 

LandyLee

Member

• Oct 7, 2006

• #6

With regards to the emissions question, I am certain for a landy of that age its just a visual check to make sure its not running to rich or burning gallons of oil....

 

S

stig

New Member

• Oct 8, 2006

• #7

If its petrol just a visual, checking for Blue or Black smoke, Diesel requires a smoke test. Barry

 

M

mark86_02

New Member

• Oct 8, 2006

• #8

thanks, yeh its a diesel but it likes to think its a steam engine with all the smoke.
mark