S

Series Dougie

New Member

• Jul 20, 2010

• #1

Hi just bought my first landie a series 2a on camac terra 4 x 4, the main issue so far is that it weaves massively are there any comon known causes to this or is it just my general ignorance of how it should drive. Any advice much appreciated a couple of mates have also driven it and the collective opinion is that it is borderline dangerous!

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jul 20, 2010

• #2

Series eh? "they all do that" .

 

Grippa

New Member

• Jul 20, 2010

• #3

The Mad Hat Man said:

Series eh? "they all do that" .

Click to expand...

Only yours, when they're being towed mainly.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jul 20, 2010

• #4

since when have I had a series 2a?

 

Grippa

New Member

• Jul 20, 2010

• #5

The Mad Hat Man said:

Series eh? "they all do that" .

Click to expand...

You generalised, so did I.

 

oxides

Well-Known Member

• Jul 20, 2010

• #6

Well, it could be the tyres, or the wheel bearings, or the swivel bearings/ bushes, or the track rod ends (choice of 6) or the steering relay or the steering box. But it's probably all of them....

 

rustyrhinos

Well-Known Member

• Jul 20, 2010

• #7

Get someone that knows their Series to take it for a drive, they will probably soon figure it. First I would jack up the front and see if you can figure out where the play is - for a start see if the steering wheel moves a fair way before anything past the steering box does - in which case you could try to adjust that (a nut and a locking nut to adjust)

 

S

Series Dougie

New Member

• Jul 21, 2010

• #8

Thanks will give it a go