J

JoeTanner

New Member

• Jul 20, 2019

• #1

Hi allnew to here and recently brought a series 2 landrover, replacing the front springs and shocks do i need to take both weeks off to do and prop up on axle stands struggling to find online guides any help would be much appreciated thanks joe

 

minecab

Active Member

• Jul 20, 2019

• #2

put axle stands under chassis and remove wheels. when you bolt up new springs leave loose until on the ground , roll it back and forward then tighten up the bolts.

 

J

JoeTanner

New Member

• Jul 20, 2019

• #3

minecab said:

put axle stands under chassis and remove wheels. when you bolt up new springs leave loose until on the ground , roll it back and forward then tighten up the bolts.

Click to expand...

Hi thank for reply having trouble getting lower shock mount to slit into locating point

 

steve2286w

Well-Known Member

• Jul 20, 2019

• #4

http://www.retroanaconda.com/landrover/2010/03/series-iii-workshop-manual/

hi here’s the workshop manual, sections on removing axle and springs , may need to take care on getting bolts out of springs on my series 3 nut comes off but still need to unscrew bolt
If your just replacing springs should be able to do them one at a time
Are the swivel chrome ballls ok

Any pics they’re always welcome

 

N

nickjaxe

Well-Known Member

• Jul 22, 2019

• #5

Why are you changing the springs?