When I bought my 90, the guy who had it before me had bolted some ford fiesta seats onto plates with no runners, then screwed the plates to the seatbox with about 50 8mm bolts. I wanted original LR seats in my truck so I bought some vinyl seats from a 90 yesterday. I have removed the plates and seats from the seatbox and found out that my new seats wont fit. The new seat runners have two large bolt holes each side, but they dont line up with the original holes that are under the plates. In fact, there only seems to be the front holes on te seat box, no back ones. Anyone got an idea of whats going on? I was under the impression that all defender seats where interchangeable (apart from tdci models).
defender11069
AKA Mr cool...
holes should be there for standerd seats
sp00k
Well-Known Member
I recently replaced my ex-mod seats with normal defender ones. There were 4 holes per seat and they lined up exactly. Don't know what's going on with your seatbox!
defender11069
AKA Mr cool...
:confused2:were the feck is the back ones
Thats exactly what I was thinking, they must have been there at some point. Ah well goin to drill new holes tomorrow and bolt em in.
