bluedog333
Well-Known Member
Depends who the manufacturer is, there are a couple of OEM seatbelts and they don’t necessarily work together. Better off buying matching pairs when it comes to that level of safety.
border
Well-Known Member
For Defender 110 , will send pics of the bits I have later.
mick 1986
Well-Known Member
I think with yours being the 110 Van, it shares the same seatbelts as the 90. I’m quite sure they are the same. From memory, it needs the type where the inertia reel has the other end of the belt attached to it, not like my 110 that the inertia reel and the end are bolted separately.
mick 1986
Well-Known Member
Just checked the parts book. I’m not sure which one it’s supposed to have now?
this is the type I have in my 110CSW, but I don’t think you have the mounting points for this as the rear bulkhead is in the way.
I think this is the type you need, but check your VIN and see if it matches up.
this is the type I have in my 110CSW, but I don’t think you have the mounting points for this as the rear bulkhead is in the way.
I think this is the type you need, but check your VIN and see if it matches up.
border
Well-Known Member
Thanks Bloody forgot to take pics , all I have is the bits that bolt to floor where belt clips in to, will get a better look tomorrow. This one should be straight forward once I know which bits I need.
Isn't it funny, you solve one big problem then think your flying now, Then more crop up straight after Found another couple of problems along the way which I didnt notice before.
Will post them up in a bit, well One at a Time anyway
Hicap phill
Well-Known Member
Should be a diagonal bracket Bolts to the roof & side
Truck cabs have different top mounts
Truck cabs have different top mounts
border
Well-Known Member
I think its These ones Mate ? But aint got a clue exactly where they bolt to.
https://www.exmoortrim.co.uk/our-mo...-onwards/seat-belts/top-mounting-bracket.html
Roof and back of b pillar/door frame
border
Well-Known Member
Should there be pre drilled holes for them, dont suppose you have a pic.
Cant find one anywhere
Hicap phill
Well-Known Member
It uses 2 roof bolts.
Unsure if you drill holes to suit
Unsure if you drill holes to suit
border
Well-Known Member
Attachments
mick 1986
Well-Known Member
According to the last of them drawings I posted, it’s for “full length hood” vehicles. Isn’t that a 110 van? If so, it bolts to the B pillar, the same as mine. Am I missing something?
mick 1986
Well-Known Member
Just seen this. It seems to say it’s the correct one for the job, but I have never dealt with these seatbelts, so I don’t know.
border
Well-Known Member
Think its those Brackets that bolt to roof and these Belts, for Hardtop https://www.lrparts.net/vehicle/lan...ts-and-front-seat-belts/front-seat-belts.html BTR6561 and BTR6562
