Clarky130
New Member
Ok, figured it myself. Ordered a pair of these:
Securon Securon 217E Lap Belt - S217E
60cm long buckle bit and 150cm long Tongue bit, and have found somewhere to mount them. Will report success (or otherwise) with pics, for anyone else interested in putting 2 extra seats in their boot.
Securon Securon 217E Lap Belt - S217E
60cm long buckle bit and 150cm long Tongue bit, and have found somewhere to mount them. Will report success (or otherwise) with pics, for anyone else interested in putting 2 extra seats in their boot.
strange_days
New Member
is it the full bollox overfinch?
interested to see some pics
interested to see some pics
Clarky130
New Member
Ok, all sorted. The belts I ordered yesterday came to day, and took me about 30 mins to fit ( aside from a short break to stem the heavy bleeding caused by my ineptitude with a Stanley knife!!!)
I mounted the buckle sections to the inboard bolts on the rear seat latch rails - cut back a bit of carpet and cut some space out of the foam sound deadening for the brackets. I then mounted the 'tongue' section to the existing lower mount points for the rear seatbelts, using the mounting bolts supplied with the belts - they were slightly longer than the originals on the RR:
And the finished article:
Next job will be to add an internal tailgate release button. Anybody done one, or know how?
I mounted the buckle sections to the inboard bolts on the rear seat latch rails - cut back a bit of carpet and cut some space out of the foam sound deadening for the brackets. I then mounted the 'tongue' section to the existing lower mount points for the rear seatbelts, using the mounting bolts supplied with the belts - they were slightly longer than the originals on the RR:
And the finished article:
Next job will be to add an internal tailgate release button. Anybody done one, or know how?
Last edited:
996TURBO
Active Member
I did, very easy to do.
I ran some wires from the tailgate release button using factory grommets then to the RHD rear light.
