chunkymunky
New Member
You could do one for thor with a big c0ck on it.
Dr_evil
Banned
Snigger
could put half a sheep on there too and the other half of the sheep on one for BoB
chunkymunky
New Member
But a plasma would be a good addition. Surely they've got one at college?
Dr_evil
Banned
no you're thinking of miller, they're with hobart and lincoln
the murex is similar to boc
murex is a 301 transweld, challenger with a split feed/power unit so you can move round the place a bit easier
http://arcweldingproducts.co.uk/equipment/welding-equipment/ this is the 400, which is a bigger 3 phase
tig/stick/plasma I'm considering is a lincoln invertec v160-s
Invertec V160-S | Lincoln China
the murex is similar to boc
murex is a 301 transweld, challenger with a split feed/power unit so you can move round the place a bit easier
http://arcweldingproducts.co.uk/equipment/welding-equipment/ this is the 400, which is a bigger 3 phase
tig/stick/plasma I'm considering is a lincoln invertec v160-s
Invertec V160-S | Lincoln China
Dr_evil
Banned
doesn't work, we use the oxy or cut with grinder/bandsaw
that is a light weight one, and the tig option will not work for aluminum
Dr_evil
Banned
first link in the last post next to where it says 400 one
but this is the manual for it with a proper pic
http://www.murexwelding.co.uk/manuals/other/Instruction Manuals/Challenger 301T-386T-Lynx 2D-4D.pdf
yeah I know the lincoln wont do ally as it doesn't have a HF start, was offered a big ass murex single phase today
Murex Transtig Tig Welder | eBay
went to look at the one in the link but it was far too big for what I want to do, awesome price though £550 all in with a full 6ft Ar bottle and the cooler, new torch too but just far too big, it was a 300lb welder so no chance of me using that here
also is a single phase but draw will be massive on it, think its a 120A draw on 220v or a 60A draw on 440
but this is the manual for it with a proper pic
http://www.murexwelding.co.uk/manuals/other/Instruction Manuals/Challenger 301T-386T-Lynx 2D-4D.pdf
yeah I know the lincoln wont do ally as it doesn't have a HF start, was offered a big ass murex single phase today
Murex Transtig Tig Welder | eBay
went to look at the one in the link but it was far too big for what I want to do, awesome price though £550 all in with a full 6ft Ar bottle and the cooler, new torch too but just far too big, it was a 300lb welder so no chance of me using that here
also is a single phase but draw will be massive on it, think its a 120A draw on 220v or a 60A draw on 440
Lincoln makes damn good welders nothing wrong with them. Just interesting finding where these company's go to and how far there products reach around the world. And how they acquire smaller company's along the way
Yes in the tig but ebay ad said 3 phase
Dr_evil
Banned
it is a three phase but it runs single phase, I read the manual for it and it seems you can wire it up to two or three phase by swapping round a couple of pins inside
only problem is its size and draw!
no idea if murex are lincoln now or combined into a parent company but still a good set as you say, will be one to last me til I stop welding now at any rate. Just as good as a Migatronic which was my original target but the murex is closer
only problem is its size and draw!
no idea if murex are lincoln now or combined into a parent company but still a good set as you say, will be one to last me til I stop welding now at any rate. Just as good as a Migatronic which was my original target but the murex is closer
