P38_Ireland
Well-Known Member
read the instructions and looked at the stuff and there doesent seem to be the part behind the wing? does this come with it or is it supposed to be there? mine doesent seem to be there?
jamesmartin
Well-Known Member
mwc1826 is plastic duct and mwc1827 pipe to duct
Station House
Well-Known Member
Sorry - can't advise myself, but saxmanuk, mundungus, khaos and lynall have all posted recently on safari snorkels - might be worth a pm if they don't find this
P38_Ireland
Well-Known Member
is that a standard part? if i remove the 5 screws behind the cover does it release that part?
What have you currently got behind the wing to pipe the air into the airbox? Everything inside the wing should be existing and you just replace the grill with the snorkle (plus carry out all the necessary sealing of course).
If you haven't got the duct for some reason (MWC1826) then I have a horrible feeling you will have to start looking for a secondhand one as they are no-longer available new (shame as they were only about a fiver).
If you haven't got the duct for some reason (MWC1826) then I have a horrible feeling you will have to start looking for a secondhand one as they are no-longer available new (shame as they were only about a fiver).
P38_Ireland
Well-Known Member
thanks for the tips lads. removed the 5 screws and found everything, 1 problem was the plastic section i pointed out in the pic has a hole at the bottom so need a new on of them. thanks for the help lads.
P38_Ireland
Well-Known Member
no its actually the part behind it. basicly an "elbow" it has a hole in the corner. anyone got a part number for that?
