karlp606 said:
Are they any options to swap the tail pip/exhaust tip on Def 90?
I cant seem to find any exhaust trims or would just swapping out the exhaust tail pipe like here https://www.bearmach.com/product/rear-pipe-and-silencers-enexexre/exhaust-tail-pipe-br-3273/BR 3273?glCountry=UK&glCurrency=GBP&gclid=CjwKCAjwmeiIBhA6EiwA-uaeFbLFTg-oHwOGsr7y1QowNmv71Fezo-qMcFQ2Wg-TrJmSHSFtlB9dexoCmY0QAvD_BwE
Be the easiest thing to do - Presume its just a nut and bolt jobbie
Click to expand...
If yours does not have the extra box on the back pipe (mine does - 200tdi) then yes that will do. You unbolt the exhaust clamp and unhook from the rubber hangers. Good luck getting the bolts undone, I had to cut mine off!!
 
You need at least two of these to make it sound like a beast:rolleyes: The more pipes the more beasty it sounds :)

5D2745F9-12CA-4FD2-9405-8242E7257895.png
 
Don't buy britpart exhausts. They might be cheap but they never last. I bought a good quality brand from my local motor factors (for the same cost as ****part) and the whole exhaust has lasted me 4 times as long as the bluebox parts I'd fitted before
 
I had three BP rear sections and they were fine, each lasting 5-years which was exactly the same length of time as the original tail-pipe.
Two of the BP sections were stamped Bosal (a very respected maker of systems) so as usual they were other brands simply with a BP sticker applied. I don't have a problem with that!

If you fancy a shiny tailpipe then Demand Engineering do a nice (full) system, fitted one to my 90 last year.

DSCF0023.JPG
 
Its just the exhuast tip on mine is very rusty, back box etc looks less than 3 years old so was wanting to check options if theres a stainless tip you can swap over, rest of the exhaust is mint.
 
Bit of sand paper and a spray can from Halfords;);):D.

Its not that high on a list really:p.

J
 
You must log in or register to reply here.