theflyingvegetable
Member
Well that's the wing welded up into one part, seam sealed and two coats of bonda primer on it. Beer O clock.
theflyingvegetable
Member
Wing fitted. Bit of a mission. Tomorrow time to put it together and see if everything fits. Brace yourselves, if the bonnet doesn't fit then you'll probably hear the swearing from wherever you are in the world.
And I think I'm still off my tits on paint fumes.
Happy with some bits of the job, not so happy with others where I couldn't quite seem to get things to fit right, or where I've had to cut corners due to time pressure
And I think I'm still off my tits on paint fumes.
Happy with some bits of the job, not so happy with others where I couldn't quite seem to get things to fit right, or where I've had to cut corners due to time pressure
theflyingvegetable
Member
Car back home! Pics.
Begin.
About a million spot welds later. Much easier to just chomp the whole thing off and then get the other bits off.
bah.
Begin.
About a million spot welds later. Much easier to just chomp the whole thing off and then get the other bits off.
bah.
theflyingvegetable
Member
welded, load of primer
new wing on
anyone know what these are for?
headlight adjuster? fog light? side repeater?
theflyingvegetable
Member
Not headlight adjuster, don't think they are fog light (though there are some spare ones for those), and not side repeater. Couldn't see any similar ones used or not on the other side.
theflyingvegetable
Member
Don't think so... end bit of loom near headlight box, coolant tank is way further back
ant.7
Active Member
theflyingvegetable
Member
Looks less bodgy than mine
