adam300tdi

Active Member
finaly decided to get round to doing my front diff pinion seal.been leaking since i got my disco.just got the flange off and theres loads ov play in pinion,does that meen the diff is ####ed.it moves about half a inch all round.
 
Surely if he has taken the flange off by undoing the centre nut, all of the preload will have been removed from the pinion bearings, so it will float around?
Replace the seal and flange, tighten the nut to the correct torque and that should remove the play, or am I missing something?
 
Surely if he has taken the flange off by undoing the centre nut, all of the preload will have been removed from the pinion bearings, so it will float around?
Replace the seal and flange, tighten the nut to the correct torque and that should remove the play, or am I missing something?

My mistake, assumed it had been re-essembled.

I must remember to read posts properly :doh: :eek:
 

Similar threads