Manuals at The Green Oval - Home
And a 'how to' at www.rangerovers.net/repairdetails/index.html#braking1
And a 'how to' at www.rangerovers.net/repairdetails/index.html#braking1
Thank you. Bled the brakes today but it feels like there is no brake servo,the brakes work but you have to proper press the pedal hard to apply any braking pressure,there is a unit in front of the abs system that makes a buzzing noise until you press the brake pedal then it shuts up,is it some type of air pump to assist braking?
classic kev
Well-Known Member
Sounds like you need to start from scratch. Bleeding the ABS system can be a nightmare, I've been there.
Follow the exact sequence in Rave/workshop manual. A pressure bleeder makes it a bit easier. When it's done, the pedal should be really sharp and the Rangie should pull up smoothly and in a dead straight line. Anything less than perfect braking means you have a problem and you need to get it looked at.
Follow the exact sequence in Rave/workshop manual. A pressure bleeder makes it a bit easier. When it's done, the pedal should be really sharp and the Rangie should pull up smoothly and in a dead straight line. Anything less than perfect braking means you have a problem and you need to get it looked at.
