v8geoff said:

hi all thinking off bringing my exhaust out the front and up side of windscreen like snorkel on other side I have a 3.9v8 thinking off from down pipes across by front crossmenber with a silincer box then up through wing maybe straight pipe or a small stack any thoughts or suggestions as still in thinking about it as I saw it done on a 110 and it looked ace

Click to expand...

v8geoff said:

Would love that zoomies weren't they but not sure about mot

Click to expand...

v8geoff said:

hi all thinking off bringing my exhaust out the front and up side of windscreen like snorkel on other side I have a 3.9v8 thinking off from down pipes across by front crossmenber with a silincer box then up through wing maybe straight pipe or a small stack any thoughts or suggestions as still in thinking about it as I saw it done on a 110 and it looked ace

Click to expand...

marccleave said:

Would you bring it up on the outside from the underneath or try and do it through the body work and out the scuttle panel? Little difficult on a RRC as under the scuttle panel (the panel under the windscreen) is the bulkhead and footwell. So you'd have an exhaust pipe running up through the footwell.

See this picture for reference as to what is under the scuttle panel.

If you had it coming up the outside of the RRC you'd have an extra 3" on one side, plus a hot exhaust that pedestrians would get burnt on.

Click to expand...

v8geoff said:

I saw it on a 110 at Newbury sort out just thought it looked good but doesn't seem feasible

Click to expand...

aaronmorris said:

Hmm, Wonder what the legalities are with bringing an exhaust straight out the bonnet.
Cummins 6bt with a 5" pipe sticking out the bonnet

Click to expand...