W

Walshie

New Member

• Apr 23, 2010

• #1

Hi,
I have a 92 RRC 3.9 V8.
The ABS light is on. Blink test tells me the stop light switch is the cause.
Tried to adjust - got nowhere. Bought a new one but still the same issue.
Blink gives me 2-6 stop light switch.

Driving me nuts - so really appreciate any ideas???
Thx
W

 

wammers

No longer with us, RIP

Donater

• Apr 23, 2010

• #2

Walshie said:

Hi,
I have a 92 RRC 3.9 V8.
The ABS light is on. Blink test tells me the stop light switch is the cause.
Tried to adjust - got nowhere. Bought a new one but still the same issue.
Blink gives me 2-6 stop light switch.

Driving me nuts - so really appreciate any ideas???
Thx
W

Click to expand...

Stop blinking then and check abs sensor plug wiring and sensors for correct positioning.

 

W

Walshie

New Member

• Apr 23, 2010

• #3

Thanks - but this is amateur corner!!
How do I check the sensor positions?

 

S

ssmn1234

Active Member

• Apr 23, 2010

• #4

wammers said:

Stop blinking then and check abs sensor plug wiring and sensors for correct positioning.

Click to expand...

get under vehicle, locate the sensors on top of axle just inside wheel, they should have a electrical cable attached. using something blunt, softly tap each one down until you feel it bottom-out, then take it for a run. Could also be one of the wheel bearings a tad loose also, especially the rear bearings they need to be adjusted spot-on, with absolutely no play at all.

 

Khryztal

New Member

• Apr 23, 2010

• #5

2-6 stop light switch

faulty switch or wiring. Fuse A5 blown or not fitted.

check pedal return or wiring/switch