KingMustafa · Jan 10, 2019

Hi all,
My friend has a problem wth his RR SPORT 2007 this happened after he changed the wheels. After he drove the car for a while, iit falls down from front side and hunged up from back, and the selection switch turned off in middel board.

I cleaned the fault codes, tried lowerd from back by deflation mode on my tool but the refused that and still up. How can I reset the Ecu susp.

johnlad · Jan 10, 2019

KingMustafa said:
Hi all,
My friend has a problem wth his RR SPORT 2007 this happened after he changed the wheels. After he drove the car for a while, iit falls down from front side and hunged up from back, and the selection switch turned off in middel board.

I cleaned the fault codes, tried lowerd from back by deflation mode on my tool but the refused that and still up. How can I reset the Ecu susp.

Sounds like the height sensors may have been damaged when fitting the wheels have a look underneath for any damage, also fault code maybe helpful

KingMustafa · Jan 10, 2019

johnlad said:
Sounds like the height sensors may have been damaged when fitting the wheels have a look underneath for any damage, also fault code maybe helpful

No fault codes found for sensors. I have checked

td4van · Jan 10, 2019

Sounds as if height sensor has been doubled back on itself after jacking up the car and is now operating in reverse

Have you looked at the real time readings from the sensors to compare?

KingMustafa

Member

johnlad

Well-Known Member

KingMustafa

Member

td4van

Well-Known Member

Similar threads