blackstrat
Well-Known Member
For LR headliners I just rip the old cloth off, strip the foam & glue with a wire brush and give it 2 coats of bathroom/kitchen paint..
This is a Discovery 2 but I've done Defender and RRC ones like this.. you can't tell the difference unless you touch it..
This is a Discovery 2 but I've done Defender and RRC ones like this.. you can't tell the difference unless you touch it..
aaronmorris
Head's a shed
That looks good bud. What thickness ply did you use out of interest?
LNH
Member
5M veltrim van lining mouldable carpet + 5 cans trimfix high temperature glue | eBay
comes with the glue!
comes with the glue!
XRIZLAX
Active Member
hi aaron, 5.5 mm, cut out the squares with another underneath to give the "step" then another piece for the back.
ive got the rhs to do so will take pics to explain better.
ordering some netting as per the MUD panels.
aaronmorris
Head's a shed
Ah, cheers. Yeah that makes sense anyhow. I did notice the step, kinda looks factory like that
If mine come out half as good I'll be happy.
Just not sure how much carpet I should order now.
aaronmorris
Head's a shed
Aye, so I've seen
Brothers will just be van sides and rear tub as his head lining is good.
My head lining is knackered, so got that to do, both front and rear. Then van sides and tub again.
Wont be doing front of either, as both have lr rubber matting.
Gotta take the roof of his and paint it first mind before I fix the ply in place.
aaronmorris
Head's a shed
I think i should have used a lighter shade of grey as its a bit dark in the back
Ah, interesting. I was thinking about using something like anthracite grey.
