Hello,

I have just ordered some 2k non-isocyanate paint for the land rover.

I was thinking of using a roller to apply the paint.

The instructions say 1 litre paint, 500ml harder and 15% thinner. This is for spraying, would i need more or less thinner for rolling?

Also apparently i can wet and dry with 2000 grit and then clear coat to get a deep sign. Is this advisable considering its a land rover and it wont ever have perfect body work?

Cheers

It would be worth talking to the supplier and get their take on it, but this should be an interesting thread

I have done this with 2k paint at work on folklifts.
You shouldnt need a clear coat.
2k buffs out ok.
Just have to watch out for tiny air bubbles you get in the paint, dont over roll.
Paint goes off fast on the roller.
I would think less thinner would be best.