JamesDEdgar

New Member

• Sep 15, 2013

• #1

hi im after a roll cage for my 90 pick up but cannot find what i want anywhere!





along these likes but with the rear bars going all the way to the back of the tub

 

johnlad

Well-Known Member

• Sep 15, 2013

• #2

try whitbread off road

 

Pikey

Dummy Ejection Facilitator..

• Sep 15, 2013

• #3

Send our resident welding & fabrication genius, a PM.

Pressbrake. Is ya man... But don't have them bolt on struts. They look fooking awful and would probably snap off in the event of a roll over.

 

JamesDEdgar

New Member

• Sep 15, 2013

• #4

im also located in cheshire so near here?

 

Pikey

Dummy Ejection Facilitator..

• Sep 15, 2013

• #5

Think PressBrake is in Essex But still worth having a chat with. As I'm sure he'd be worth the trip south to get it fitted.

 

jai_landrover

Well-Known Member

• Sep 15, 2013

• #6

Pressbrake or Whitbread if you want it to compete in it Must meet MSA regs if you want to meet ALRC regs it must exceed MSA Regs to ALRC Regs.

 

JamesDEdgar

New Member

• Sep 15, 2013

• #7

seems everywhere who do them are 3+ hours away from me

 

200tdi ayre

Well-Known Member

• Sep 15, 2013

• #8

Them supports are useless, you need bars going from the corner of the main hoop to the chassis rail to meet MSA reg which most competition is run under now, even of you don't do competition it's worth having a good strong cage as 1 it's more protective and 2 if you ever sell it it's more desireable as it conforms to all regs so someone else can use it for comps

There's loads of company's that build cages

 

300tdistu

Well-Known Member

• Sep 16, 2013

• #9

johnlad said:

try whitbread off road

Click to expand...

Do what john did buy your cage flat pack and get a local fabricator to build it for you.

Its now back off john 90 and being painted today

 

Boris113

Well-Known Member

• Sep 16, 2013

• #10

The one in your picture is made by Safety Devices. Land Rover Defender 90 Truck Cab/Pick-Up 6 Point Bolt-in Roll Cage | Safety Devices ? Experts In Automotive Safety Solutions

I agree with the above though, if you are going to spend the money then you may as well get one that meets MSA/ALRC spec

 

johnlad

Well-Known Member

• Sep 16, 2013

• #11

300tdistu said:

Do what john did buy your cage flat pack and get a local fabricator to build it for you.

Its now back off john 90 and being painted today

Click to expand...

thats good news Stu,
when we fitting it back, Wednesday?

 

300tdistu

Well-Known Member

• Sep 16, 2013

• #12

johnlad said:

thats good news Stu,
when we fitting it back, Wednesday?

Click to expand...

Yes im good with that mate